Finland In Axis & Allies Stalingrad?

Here is a Facebook group for Australian fans of Axis and Allies: www.facebook.com/groups/axisandalliesaustralia

Round Four:
Red attacks the 2 VP base below the North Pole Base, with two C and a Rattler. Using Cobra Commander’s special ability, all that is left is Blue C and a trooper on the 2 VP island base. Builds a Cruiser.
Blue attacks Polar Base with a C and Trooper, defended by Red C and land base trooper. Blue fleet is lost, moves from Blue 12 VP a C and Jet to Blue 2 VP Base. Builds a trooper and 2 C on Blue Base.
Black C joins Red C at NP Base. Two C midpoint to NP Base and Black home base. Also C and a landed Trooper to 1 VP island just below Black 8 VP base. Builds a C, previously had “iced”, the sea left of NP Base.
White land a Trooper to upper left of North Pole Base, and, joined there by three more White C. Another two C joins Blue C and Jet on 2VP island Base just below NP Base. Builds 3 C, two at 2 White Base and another at Apogee Base.

Considering that it is good to use as few chips or bucks as possible to fill each player’s amount, more high-value coins and fewer low-value coins should be used.
Looking at the needs for the Anniversary edition we cover all the others except the Global edition which has higher requirements and taking into account that the Anniversary, Europe, Pacific and Global editions also require extra amounts from the National Objectives Income.
It should also be taken into account that it is impossible to achieve all National Objectives at the same time because on the one hand some overlap between rival powers and also it is impossible for both sides or for all powers to excel at the same time. However, here the calculation takes into account the theoretically maximum amount that can exist.
Below I also list the quantities required in editions as well, including the revenues from the National Objectives, where they exist:
Starting IPC’s for Axis & Allies games:
1941: 55
Pacific 1940: 81 (157)
Spring 1942: 166
Anniversary: 171 (246)
Europe 1940: 149 (249)
Global 1940: 241 (373)
A&A IPC Calculation.pdf
A&A IPC Calculation photo.png
For the Anniversary edition:
IPC Chips with a value of 1:
It is possible that 6 quads with a value of 1 are needed at the same time. For example if all powers have income ending in 4 or 9 (eg 4, 14, 9, 19 etc). This means that 24 chips with a value of 1 may be needed.
IPC Chips with a value of 5:
Also if all powers have income ending in 5 to 9 at the same time (eg 5, 6, 7, 8, 9, 15, 16 etc) they may need 6 tokens with a value of 5 at the same time. This does not change if there are chips with a value of 25 in the set because then, they complete the five after 25 to make a ten up to 30 for the amounts that follow (e.g. 31, 32, 33, 34, 41, 42 etc.).
IPC Chips with a value of 10:
If there are no chips of 25 then 20 chips with a value of 10 may be needed at the same time since the maximum total income reaches 246 IPC.
Having chips worth 25 greatly reduces the requirement for chips worth 10 used to complete tens between 10 and 25 or between 25 and 50 (eg 35, 45 etc). Therefore, the highest requirement for chips with a value of 10 occurs if all powers need two chips with a value of 10 at the same time, so 6 pairs, i.e. 12 chips with a value of 10.
So the perfect sets for the Anniversary Edition are:

Simple required set: 24x1 + 6x5 + 20x10 = 256 IPC with 50 chips Simple configured set: 25x1 + 5x5 + 20x10 = 250 IPC with 50 chips Full required set: 24x1 + 6x5 + 12x10 + 3x25 = 249 IPC with 45 chips Full configured set: 25x1 + 10x5 + 10x10 + 3x25 = 250 IPC with 48 chips

Likewise for the Global version:
IPC Chips with a value of 1:
If all powers have income ending in 4 or 9 (e.g. 4, 9, 14, 19 etc), 10 quads with a value of 1 may be needed at the same time, meaning 40 tokens with a value of 1.
IPC Chips with a value of 5:
Also, 10 chips with a value of 5 may be needed at the same time if the powers’ incomes end in 5 to 9 (eg 5, 6, 7, 8, 9, 15, 16 etc). This does not change if there are chips with a value of 25 in the set because then, they complete the five after 25 to make a ten up to 30 for the amounts that follow (e.g. 31, 32, 33, 34, 41, 42 etc.).
IPC Chips with a value of 10:
If there are no chips of 25 then 29 chips with a value of 10 may be needed at the same time since the maximum total income reaches 373 IPC.
If there are chips with a value of 25 it greatly reduces the requirement for chips with a value of 10 which are used to complete tens between 10 and 25 or between 25 and 50 etc. Therefore, the highest requirement for chips with a value of 10 occurs if all powers need two chips with a value of 10 at the same time, so 10 pairs, i.e. 20 chips with a value of 10.
Therefore the perfect sets for the Global version are:

Simple required set: 40x1 + 10x5 + 29x10 = 380 IPC with 79 chips Simple configured set: 40x1 + 10x5 + 30x10 = 390 IPC with 80 chips Full required set: 40x1 + 10x5 + 20x10 + 4x25 = 390 IPC with 74 chips Full configured set: 40x1 + 10x5 + 20x10 + 5x25 = 415 IPC with 75 chips

They are bean counters. No doubt about it. They want exact results with no luck. All life is luck and games are simulations of life.

I don’t vilify anything. Its accurate reporting of facts and theirs nothing glamorous of low luck. To me its only value is for play testing of games, not actual games.

Bean counters are also mostly Rule Lawyers. They argue rules all day if possible.

Some useful charts and comparisons for the including components, between the various versions of the Axis & Allies boardgame. It is about the number of units, their capabilities and their type names. In the following link:
https://www.dropbox.com/s/0kgpp74n68fiew8/A%26A Comparisons.pdf?dl=0

Model Scales:
SOLDIERS: 1/72
TANKS: 1/285
AIRPLANES: 1/900 or larger (2cm for fighters and 4cm for bombers)
SHIPS: 1/4800 to 1/2400
(Νote that as the denominator number increases, the model becomes smaller. That is, a 1/4800 scale model is smaller than a 1/2400 scale model)
614327a5-bdd4-4d6d-bc96-a0827eb3c880-image.png
45c3aecf-2c87-420c-8b79-9b472cb00f75-image.png

I have put together a video of some of my biggest blunders and lowest luck. Enjoy!

https://www.youtube.com/watch?v=8R-B2AkMWAo

@majordisaster I can’t speak for AADude, but I’m interested. I’ll send you a PM.

-Midnight_Reaper

My Transport rule suggestion. I do have most of this for my transports.
D6
A0
D@1 plane only.
C6
M2
ES @1
Any planes in a naval battle with defending transports.
Can take transport as a causality but loses the D@1 against a plane.

No planes in a naval battle can’t take transports as a causality.

Lone Transports against Ships and planes. The attacker has to kill the transports .
Non of this cop out crap with lone transports all dead. WTF. They can escape.
This will prolong the battle at most 5 mins. This only happens 1-4 times in a game.
A transport gets a D@1 plane shot if killed if there is planes in battle.
No planes then the ship or ships have to kill the transport.
Now the transport only gets a escape roll if he survives the round of attack.
No escape roll for a sub FS.
2 Dest and 1 Sub attacking 3 lone transports.
Attacker rolls for 2 dest a 4 and a 5. both misses.
1 sub rolls FS shot of a 1. I killed transport. No escape.
Now the 2 transports roll for escape and get a 1 and 6.
1 transport escapes to another sz or stays in same sz and then next round of combat
the attackers only get to attack 1 transport.
Works great in my game. We ave 2-4 transports surviving per game. But it gives you more options to use transport
in naval battles.