Sired's Map project - Updated- 4/16 - files available see first post

I have been playing around with different configurations for a custom table and wanted to note some things I’ve landed on that I really like. A main one thing is having the map mounted so that it can slide around as needed on top of a bigger playing area. My table is 65” x 95” in total with a 5.5” arm rest around the outside and the middle is a recessed neoprene surface. I have the OOB Global map mounted on 1/2” rigid foam with a 1/2” aluminum frame around it. This allows the map to slide up close to whoever’s turn it is, but then be in the middle so both players can roll dice In front of them without disturbing the map and in easy view of the other player. (Plus we like lots of room to roll the bones). This ability to adjust the surface along with a standing height, makes it comfortable for long uses because you can move around more and don’t feel as tied down.
Things I’ve learned and changed from original design - I originally used too big of a frame for the map and mounted it on too high of a foam block (you can see these pictures at the bottom) - it made it hard to see the other player’s dice and the big frame took up too much real estate. My global map is mounted on much thinner foam (the framing is bad, you can see if you look closely) but I also used much thinner aluminum angle for the frame. This gives just enough grip when needing to move the map around (I use furniture slides on the bottom, which glide very nicely on the neoprene) but doesn’t make the whole thing too bulky. Having it an inch or so off the surface keeps the dice off, but isn’t so heigh that you can’t see the other player’s dice rolls. When playing other versions (such as Zombies) the board is much smaller, but it can easily swap in and out on the same table since it can move around where ever it is needed or be pushed aside.
I originally made it normal table height, but found long reaches while sitting were harder and it just felt cramped. Standing height with a bar stool is a great way to have the best of both worlds.
The 5.5” rim around the table itself gives you a nice arm rest that doesn’t interfere with the gaming surface. I’m playing with how to best add some cushion to this part - open to suggestions. Sometimes I just lay a piece of leftover neoprene on it.
Dice bounce nice on the neoprene and stay off the floor. It also feels nice and has enough give to allow things to slide but be picked up easily. Wouldn’t definitely go with neoprene again as a surface covering.
I made the drawers open to the inside of the table so you can stay hunched over the action while accessing and stowing stuff away. 50/50 on whether I would keep this if I were to do it again. If I were doing it again, I might try to build customer drawers form scratch using actual drawer glides, but that was beyond my ability when I first did this, so I just used clear plexiglass boxes with aluminum pulls mounted on them. It’s nice having them clear, and I was happy with how the pulls came out, but without glides they can be a little fussy sliding in and out of their slots.
I originally designed the table so that I could put a cover surface back on top when not in use, but find I don’t really ever do that, so if I were to do it again, I might not mess with that part (I never even finished staining those as you can see in the pictures).
CF362D52-269F-4480-8CBB-08139099138F.jpeg A9E12EA1-66EB-4671-86AC-68C62FD30AD5.jpeg 858DE1F2-030A-4D5A-93E4-70A7D1180ADB.jpeg 8F513EE0-DA37-4BA9-880E-4D5EF7BF431F.jpeg F0188165-757B-4CC1-BF67-5045832283C9.jpeg 2E3CD627-0D31-4121-ACF8-682F9F58A40B.jpeg

I thought about this as well, my 65" is not big enough for the OOB size…… after I saw that, I lol’d

Hi All,

If someone is interested, here 's our R&D set: https://www.mediafire.com/folder/owrasqpeass6a/R%26D.

These are materials for the Standard Global 1940/42 2nd edition rules and also for our simple houserule.

To speed things up we sometimes play a houserule. There the d12 board is used for along with a 12 sided die. Rule: at the beginning of every scond round (once a year) the player will roll a 12 sided dice for R&D w/o any payment. The player will gain the corresponding number in the R&D table as an ability at the end of that round. This is to give the player already the advantage during the buy phase, but not in the current attack (which he can prepare). Rolling a R&D number that you have already obtained is just though luck.

Let me know what you think, enjoy!

grtz

@cyanight:

Everyone has their own unique way of painting the pieces.  No matter how we paint the pieces they must still be playable within the game.

And the nice difference between game sculpts and real military equipment is that sculpts are rarely lost or damaged in combat.  If that wasn’t the case, people might actually hesitate to risk sending their painted sculpts into battle on the game map, given the large amount of time they’ve spent on customizing them.  :-)

@DiscoKnekt:

Nice table! Really like the NO cards! We have a problem that people tend to forget what NOs they have so we need some kind of reminder, maybe this is solution! Is there any chance you could share the file for the cards so that i save some time typing them? :)

My NO card deck will be available soon, I will let you know by PM how you can get one when they’re ready.

I’ve updated the approximates sizes/scales for some basic and alternate units.  Keep in mind that many classes of ship and aircraft, though in the same class, varied in size so my sizes will be off on some units.  If your like me I want to be able to visually distinguish between units quickly so keeping classes similar in size I find works the best. Below is my guide/attempt to standardize my pieces where they are relatively the same size for their respective class.  I’ve added some alternative classes that I use in my games and ties in some of the alternate pieces that HBG is putting out.  If you need something scaled and not sure how to do it let me know and I’ll do my best to help.

Carrier 6.5 cm 1/3700
Light/Escort Carrier 5cm 1/3100
Battleship 6 cm 1/4000
Cruiser 5.5 cm 1/3700
Light Cruiser 5 cm 1/3400
Destroyer 4.8 cm 1/2400

(cm is for the wingspan)
Heavy Bomber 4.7 cm 1/700
Medium Bomber 3.5 cm 1/600
Light Bomber 1.7 cm 1/600
Heavy Fighter (Twin engine) 2.8 cm 1/600
Fighter 2.2 cm 1/500
Light Fighter 1.7 cm 1/600
Dive/Torpedo Bomber 3 cm 1/500

Sounds great!

Wow!  Such cool pieces! (Been awhile Paul)  And there’s others I’ve yet to see that are posted -