No harm at all. I was just mentioning that they were the same ones. It’s easy to forget that the green pieces in the game aren’t actually the Americans, but rather the Allies who have retreated back to North America after losing WW2. I didn’t realize until you had posted your link that the Meteor was actually a British fighter.
Global War 1940/41
-
Gen Rommel,
I think you should be able to use the 1939 Map with the Monroe variant. It would require some adaptation of the Set Up and Income charts based on the additional and different territory names. I would think you could use DeathsHead version on the 1939 map as well, but same challenges would apply.
I also prepared a variation of the Monroe version which can be used as a 1941 variant using the standard AA40 Global map from WOTC. I have attached an excel file of this variant (v1.9) which includes Set Up charts, National Objectives (pulled relavant NOs from LH’s Alpha+) and several National Advantages. I have not yet playtested this version on the AA40 Global map.
coachofmany’s site is a great addition to the A&A community. I plan to buy the 1939 map at some point (I played the Deathshead Map to death :lol:) and several of his painted armies. This will really help complete the Monroe version (on whatever board its played).
-
Thanks for info. Maybe I’ll just get both maps. 150.00 total for 2 3 x 6’ maps. Still worth it. Then I can play all 3.
-
How do airbases work for movement and CAP’s?
1. Example: I have a fighter in Great Britian, Do I get a bonus movement on take off and landing in/from any direction or just in and out to and from z23?
2. How do CAP fighters work? Can you only make a CAP from an airbase and/or in the sz of an airbase?
-
@Deaths:
How does China work? The ipc values… who gets the ipc money and how are Chinese units built and how many etc?
The US Collects it $9 at game start.
Chinese Units are built x2 from the Factory and 1 inf. on the Burma rd.Thats how we play it.
:-o :-o :-D :evil: :mrgreen:
Wow this thread has been Pinned. Cool
thanksOn the setup card it doesn’t show where the China IC is?
So the US is in charge of building chinese units out of USA’s IPC’s? up to the max the China IC can produce?
Do they have a real IC they can be taken over and used by Japan for example? -
@Deaths:
I am Pleased to Announce that I am all done with this project. There are still a few spelling errors on the setup charts, But I think you guys can figure it out.
The long wait will be worth it.
Pictures can be found on pages 7-8 in this thread
This is a Rather large File and I blew the map up to around 6.5’ x 3.75’ I t small enough to fit on a standard sheet of Plywood and still have some room around the edges for all the “stuff” needed to play.
The Link to Map and Set up Charts-
Map
http://www.mediafire.com/imageview.php?quickkey=txzm20m1inm&thumb=4Set up Charts
USA + China
http://www.mediafire.com/imageview.php?quickkey=ximi2ni3twy&thumb=4USA is not correct chart, They do not get Factory in Hawaii
Great Britain
http://www.mediafire.com/imageview.php?quickkey=od5cwgdbsjv&thumb=4Russia
http://www.mediafire.com/imageview.php?quickkey=xbzejmzhjgm&thumb=4Germany
http://www.mediafire.com/imageview.php?quickkey=25xhbstxtq1&thumb=4Italy
http://www.mediafire.com/imageview.php?quickkey=yfmzwenewjt&thumb=4
Italy Does Not Get IC in LibyaJapan
http://www.mediafire.com/imageview.php?quickkey=zyhmdwxwa9y&thumb=4Neutral Powers
http://www.mediafire.com/imageview.php?quickkey=c0yctsctgnk&thumb=4Double the Neutral powers forces on Set up chart
Axis and Allies Global War
These links arent working for me… Could you do something about this deaths head?
-
The Set up charts work, Just not the Map :x
I can’t locate the disk in which it was on, So I can’t DL it to Media Fire.
The Only Disk I have found is an Un edited Version of the map.
My friend who lives a bit from me has the updated map on his hard drive. the problem is I keep forgetting when I visit him to get it.
so if any one has saved it to their Hard drive wants to email it to me I will gladly Re post a NEW link for the map
-
I wanted to added light and heavy tank
light tank
Move 2
2 or 3 just attack if the enemy possesses Infantry
Defence 2
IPC 5Middle tank
Move 2
Attack 3
Defence 3
IPC 6Heavy Tank
Move 2
Attack 4
Defence 4
IPC 8
Advantage must receive 2 shot to be destroyed, and can be repaired in an area with a factory, it costs nothing.Give me your opinion thank you
-
How do airbases work for movement and CAP’s?
1. Example: I have a fighter in Great Britian, Do I get a bonus movement on take off and landing in/from any direction or just in and out to and from z23?
2. How do CAP fighters work? Can you only make a CAP from an airbase and/or in the sz of an airbase?
The Air base only gives Benifit to the Sea zone(s) it touches
Cap fighters work just like in Pacific, You can only CAP a Sea Zone
-
air and naval bases - how do they work? Do you get a bonus move if you take off from an air base and a bonus move also for landing at an air base? Giving a ftr 6 moves and a bmb 8 moves?
Naval Bases let Ships and Subs move 3 spaces to a different Anchor During non Combat only. They can be used the turn you gain Control.
Air Bases let Planes Gain a Free movement into or out of the Sea zone the AB touches
-
Neutrals questions: Say Spain is attacked by Allies and not defeated… it joins Germany… and has 1 Spain unit left from the battle… does that 1 unit now turn into a German unit? How does this work?
We let the neutral Army rebuild to original strength and the country stays neutral
But you can also Play it that way also. And in that instance the Spainish units would turn German.
-
yes and yes
-
yes and yes? I don’t get it :x
-
@Deaths:
The Set up charts work, Just not the Map :x
I can’t locate the disk in which it was on, So I can’t DL it to Media Fire.
The Only Disk I have found is an Un edited Version of the map.
My friend who lives a bit from me has the updated map on his hard drive. the problem is I keep forgetting when I visit him to get it.
so if any one has saved it to their Hard drive wants to email it to me I will gladly Re post a NEW link for the map
I posted a link to map file I hosted on my personal site… i think its the map file I got here… it may or may not have been reduced in size but i think its the original.
-
Yes, that is the correct map. But it has been resized and when I try to blow it up, It gets really Fuzzy.
Do you still have the original File that you Down loaded?
that is the one we need, so peeps can print it and look at it
-
-
Thanks Coach
The New Map link now works along with ALL the Set up charts
Enjoy, And ty again Coach
-
Cancel that - I found the rules in Pacific about China, sorry
@Deaths:
How does China work? The ipc values… who gets the ipc money and how are Chinese units built and how many etc?
The US Collects it $9 at game start.
Chinese Units are built x2 from the Factory and 1 inf. on the Burma rd.Thats how we play it.
:-o :-o :-D :evil: :mrgreen:
Wow this thread has been Pinned. Cool
thanksThanks, So Szechwan is the factory? and can build x2 the ipc value of Szechwan and 1 inf on the Burma road. Do you take cash from the USA to build the units in Szechwan and do you mean you get 1 free inf if the burma road is open? Sorry to keep asking questions :)
-
I recently made a new module for abattlemap for the A&A Global 1940 http://www.axisandallies.org/forums/index.php?topic=22555.0
In it I used the same color scheme as Axis & Allies Global War, I had to figured out how to do it and I kinda did… so I thought I’d share the process with anyone wanting to do the same:
How to make the textured colors in Axis & Allies Global War Variant
Using Paint.net, which can be downloaded at www.GetPaint.net
First I click New and size the new canvas as 60 x 60 pixels (we are creating an image which we’ll use later to fill the area’s of your map)
Select the base color and use the paint bucket to fill the new 60 x 60 canvas
Click on Effects – Noise – Add Noise and just adjust the intensity… I did around 25, but experiment for yourself.
Click on Effects – Blurs – Average Blur and set the radius at 3
Now our 60 x 60 image should look like the textured color we desired.
Save it as mynewcolor.bmp
Now the area on your map that you want to fill with your new textured color, you’ll need to get a plugin for Paint.net. found here http://www.sapphireonline.com/Downloads/PhotoFloodFillPlugIn.zip and just unzip it to the default C:\Program Files\Paint.NET/Effects folder and close and reopen Paint.net
Now with your map open, use the Magic wand and select the area you want to fill with the new color. Then click on Effects – Photo Flood Fill and for Photo File name we are going to use the file we just make mynewcolor.bmp and click ok and now your map will be filled with that color.
How to make waves like in Axis & Allies Global War Variant
I just used Effect – Object – Drop shadow and settings 0’d the blur and only adjusted widening. You might see waves on the land area… no worry… you need to use layers for each wave and the land color layer should be on top of the wave layers and will cover the waves on the land. I also recommend that on the layer you’ll use to make wave that that layer only have the lines you’d like to add waves to… remove all border lines etc so it doesn’t add waves to those etc.
Tip: Always use the duplicated layer, so your not adding effects to your outline layer, always save the original outline layer for other effects.
I use these in my recent module for A&A Global 1940 module at http://www.axisandallies.org/forums/index.php?topic=22555.0 where I have the source files for download and you can see how I used them.
-
New version of the Abattlemap module is out.
Download at: http://www.axisandallies.us/G13.gim.zip
In order for this module to work correctly, you first need Abattlemap with 0.80+ update. If you already have Abattlemap 0.79 you can simply updated it to 0.80+ by downloading this file and placing it in your Abattlemap folder and let it overwrite the old abattlemap.exe : http://www.mediafire.com/file/djkingzm3in/ABattleMapv0_80+.zip - Update
If you don’t already have Abattlemap I recommend Holkann’s installer as it will come with everything you need plus some of the latest modules : http://www.mediafire.com/file/w05zwkxji5w/ABattleMap_Installer.exe
Now that you have the correct version of Abattlemap, unzip G13.gim into your Abattlemap folder (default C:\Program Files\Abattlemap) and close if open and reopen Abattlemap… from the New menu you will now see this module listed… select it and your ready to use it.
-
I’ve downloaded this map after seeing it here and on youtube and am having it printed. Looking forward very much to playing it.
Suggested Topics
