3D Printed Axis and Allies Board Game Pieces Available

  • Sponsor 2022 '20 '19 '18 '17 '16 '12

    3D Printed Axis and Allies sized Board Game Pieces are now available in the I Will Never Grow Up Games webstore;

    Currently Available (All ground based vehicles are 1:285 scale approximate):

    WW2:

    • US M5 Stuart Light Tank (Olive)
    • US Higgins Boat/Landing Craft (Olive)
    • US M3 Lee Medium Tank Early War (Olive)
    • US GMC Truck
    • US Fletcher Class DD
    • US Baltimore Class CC
    • US Iowa Class BB
    • US South Dakota Class BB
    • USS Midway CV41
    • US Gato Class SS
    • US Bogue Class Escort CV
    • German Panzer II Ausf C Light Tank (Dark Grey)
    • German Panzer III Medium Tank (Dark Grey)
    • German Panzer IV Ausf E Medium Tank (Dark Grey)
    • German StuG III Tank Destroyer/Infantry Support (Dark Grey)
    • German Sdkfz 251D Halftrack (Dark Grey)
    • German Elephant Heavy Tank Destroyer (Dark Grey)
    • German E-100 Maus Super Heavy Tank (Experimental) (Dark Grey)
    • German Panther G Medium Tank (Dark Grey)
    • German Opel Blitz (Covered) Truck (Dark Grey)
    • German Sturmpanzer SPG (Dark Grey)
    • German Tiger I (Dark Grey)
    • German Type U-31 U-Boat (grey)
    • German Scharnhorst Class Battleship (grey)
    • German Bismarck BB
    • UK Universal Carrier (Kraft/Tan)
    • UK Crusader Cruiser Tank (Kraft/Tan)
    • UK Humber Light Recon Vehicle (kraft/tan)
    • UK Archer SPG (kraft/tan)
    • UK Bishop Mk1 SPG (kraft/tan)
    • UK Churchill IV Cruiser Tank (kraft/tan)
    • UK Mk VI Light Tank (Tan)
    • UK Tetrarch Light Tank Mk VII (Tan)
    • UK Bogue Class Lend Lease Escort CV
    • UK HMS Eagle CV
    • UK Exeter Class Heavy CC
    • UK Nelson Class BB
    • UK Queen Elizabeth Class BB (HMS Warspite)
    • UK Revenge Class Super Dreadnought
    • Italian Semovente M42 da75/18 SPG (Brown)
    • Italian Carro Armato M11/39 Medium Tank (Brown)
    • Italian Carro Armato M15/42 Medium Tank (Brown)
    • Italian CV33 Tankette (Brown)
    • Russian T70 Light Tank (Red Brown)
    • Russian SU85 SPG (Red Brown) (Remodeled)
    • Russian SU-76 SPG (Red Brown)
    • Russian IS2 Heavy Tank (Red Brown) (Remodeled)
    • Russian KV1 Heavy Tank (Red Brown)
    • Russian BA64B Armored Car (Red Brown)
    • Russian T34-85 Medium Tank (Red Brown) (also used extensively through the cold war)
    • French AMR 35 Light Tank (Blue)
    • French Char B1 Bis Heavy Tank (Blue)
    • French Renault UE tankette/Armored Carrier (Blue)
    • French Surcouf SS
    • French Dunkerque Class BB
    • Japanese Type 97 Chi Ha Medium Tank (Orange)
    • Japanese Type 95 Heavy Tank (Orange)
    • Japanese Ho Ni SPG (Orange) (Remodeled)
    • Japanese Type 95 Ha Go Light Tank (Orange)
    • Kaga Class CV
    • Ise Class BB
    • Akatsuki Class DD
    • Myoko Class Heavy Cruiser
    • No.13 Sub Chaser
    • Type C3 I-52 Class Submarine
    • US Victory Class Transport (Olive)
    • US Northhampton Class CA (Olive)
    • US Balao Class SS (Olive)
    • Italian Soldati Class DD (Brown)
    • Italian Foca Class SS (Brown)
    • Italian Littorio BB (Brown)
    • UK Flower Class Corvette (Tan)
    • UK Dido Class CA (Tan)
    • UK Valentine Infantry Tank (Tan)
    • German Auxiliary Class Cruiser/Cargo Ship Atlantis
    • German Type IX SS

    Cold War Era:

    • US M113 APC Olive
    • US UH1B Huey Helicopter Olive
    • Russian T34-85 Medium Tank (Red Brown)

    GENERIC

    • Minor Factory
    • Major Factory v1
    • Major Factory v2
    • Naval Port
    • Air Base
    • Atlantik Wall Gun Casement
    • Machine Gun Bunker
    • Flak Tower - Square
    • Flak Tower - Round
    • Recruitment Camp

    Coming:

    WW2:

    • French Hotchkiss H39 Cavalry Tank (Blue)
    • French Somua S35 Cavalry Tank (Blue)
    • US M7 Priest (Olive)
    • US M9A1 Halftrack (Olive)
    • Russian Svetlana Class CA (Red-Brown)
    • Russian ZIS 5 Truck (Red-Brown)

    AND MORE!

    All pieces are scaled to be Axis and Allies size compatible (all ground vehicles approximately 1:285 scale).

    ca$0.50 per piece

    alt text


  • Those look great!
    At a good price also. I had to pay $2ea. for my pewter universals.
    Knowing these were produced mainly for the Battle of France game, what are the chances of you expanding the line? Like the Semovente from the old field marshal set, or a few of the many types of Su’s the Soviets made.

  • Sponsor 2022 '20 '19 '18 '17 '16 '12

    @Mr-Kell said in 3D Printed Axis and Allies Board Game Pieces Available:

    Those look great!
    At a good price also. I had to pay $2ea. for my pewter universals.
    Knowing these were produced mainly for the Battle of France game, what are the chances of you expanding the line? Like the Semovente from the old field marshal set, or a few of the many types of Su’s the Soviets made.

    Hey Mr Kell, I’m definitely looking into adding more. The models I printed are based off of existing models I found files for online so it does take some time to get each one ready to go, plus the time to print as I like to have some stock on hand before I add them.

  • Sponsor 2022 '20 '19 '18 '17 '16 '12

    This post is deleted!
  • '17 '16 '15 Organizer '14 Customizer '13 '12 '11 '10

    The elephant is missing the barrel and why so many random pieces? Where these for some game that didn’t make it?

  • Sponsor 2022 '20 '19 '18 '17 '16 '12

    @Imperious-Leader said in 3D Printed Axis and Allies Board Game Pieces Available:

    The elephant is missing the barrel and why so many random pieces? Where these for some game that didn’t make it?

    Yes, the barrel was too thin and snapped. Needs to be adjusted (this is why I do test prints first).

    And … why not? Variety is the spice of life.

  • '17 '16 '15 Organizer '14 Customizer '13 '12 '11 '10

    But a planned offering of units that might compliment games OOB pieces.

    For example a set of light cruisers for 1940, or Heavy Tanks, or etc

    Its such a Hodge Podge of units from different eras right?

    11 models, 8 German, then this that and another… Very expensive hobby to do this sort of thing.


  • @IWillNeverGrowUp look good I placed my first order. Spewing I ordered before you posted the italian self propelled guns. If I would suggest anything seaplanes and minor tanks. Ie filling the gap others don’t do.
    Keep them coming, what else are you planning

  • Sponsor 2022 '20 '19 '18 '17 '16 '12

    @Call77 said in 3D Printed Axis and Allies Board Game Pieces Available:

    @IWillNeverGrowUp look good I placed my first order. Spewing I ordered before you posted the italian self propelled guns.

    Sadly the Semovente’s we listed were not a great color (I like it myself, but it’s nowhere near a real brown) and we’ve got a new brown coming in this week.

    Also, we’re going to keep adding to the lineup as we can and this process will take time! I refuse to simply take a pre-made file (many of which can be found online for free) and sell the printed product from that. Every piece is being 100% recreated from the ground up!

    If I would suggest anything seaplanes and minor tanks. Ie filling the gap others don’t do.
    Keep them coming, what else are you planning

    Current list (including what’s listed above);

    Available Now:

    WW2:

    US M5 Stuart Light Tank Olive
    US LCAV Landing Craft Olive
    German Panzer III Dark Grey
    German StuG III Dark Grey
    German Sdkfz 251D Dark Grey
    UK Universal Carrier Kraft/Tan
    UK Centurian Tank Kraft/Tan
    Italian Semovente M42 da75/18 Brown (Awaiting the proper color)

    Cold War Era:

    US M113 APC Olive
    US UH1B Huey Helicopter Olive

    Coming (aka: 3d files being worked on):

    WW2:

    German Elephant Dark Grey
    German E-100 Maus Dark Grey
    German PantherG Dark Grey
    Russian T70 Tank Red
    Russian SU85 Tank Red
    Russian IS2 Tank Red
    Russian KV1 Tank Red
    Russian T34 Tank Red
    French AMR35 Light Tank Blue
    French Char B1 Bis Heavy Tank Blue
    French Renault UE tankette/Armored Carrier Blue
    French P107 Halftrack Blue
    Type 97 Chi Ha Medium Tank Orange
    US M3A1 Halftrack Olive

    I’m also working on getting aircraft to print well enough to use. Outside of bombers it’s been tough to get them right so far. Never considered sea planes, but I’ll look into it.


  • @IWillNeverGrowUp colours dont phase me I paint my guys

  • Sponsor 2022 '20 '19 '18 '17 '16 '12

    Updated original post with list of currently available + coming soon


  • @IWillNeverGrowUp hi I was trying to place an order today but noticed the T70 stock was only 2 and the back order of semovente. How does the back order work and shipping and any idea when you may have more t70.

  • Sponsor 2022 '20 '19 '18 '17 '16 '12

    @Call77 said in 3D Printed Axis and Allies Board Game Pieces Available:

    @IWillNeverGrowUp hi I was trying to place an order today but noticed the T70 stock was only 2 and the back order of semovente. How does the back order work and shipping and any idea when you may have more t70.

    Printing more T70’s right and I should be putting Semovente’s up in the shop by the end of the week.
    The 3D Printers are running 24/7 right now to build up stock (and keep up with those that are selling).


  • @Imperious-Leader said in 3D Printed Axis and Allies Board Game Pieces Available:

    But a planned offering of units that might compliment games OOB pieces.

    For example a set of light cruisers for 1940, or Heavy Tanks, or etc

    Its such a Hodge Podge of units from different eras right?

    11 models, 8 German, then this that and another… Very expensive hobby to do this sort of thing.

    Yes, my requests would be along similar lines. I like specific sculpts for special technology and/or house rules units. And this drives most of my buying of aftermarket units.

    But number 1, tell us the actual dimensions rather than just “approximately 20 x 10mm”. Because if both the French light tank and the French heavy tank are the same size, I won’t want them both. I might not want either if they are the same size as the OOB medium.

    My current biggest need/desire:
    A “Super Carrier” than can handle 3 planes comfortably (OOB carriers are too small/short for this).
    A RADAR guided AAA sculpt.

  • Sponsor 2022 '20 '19 '18 '17 '16 '12

    @Grintch said in 3D Printed Axis and Allies Board Game Pieces Available:

    Yes, my requests would be along similar lines. I like specific sculpts for special technology and/or house rules units. And this drives most of my buying of aftermarket units.

    As an ongoing project we’ll get there eventually. These things take time and we started small to see if there would be any demand at all and have been increasing the offerings from there. It also takes time to produce new sculpts, new prints and keep up with the already high demand for the prints we have now.

    But number 1, tell us the actual dimensions rather than just “approximately 20 x 10mm”. Because if both the French light tank and the French heavy tank are the same size, I won’t want them both. I might not want either if they are the same size as the OOB medium.

    Sizing has been removed from this post and updated in our web store on the page for each sculpt.


  • @IWillNeverGrowUp said in 3D Printed Axis and Allies Board Game Pieces Available:

    Sizing has been removed from this post and updated in our web store on the page for each sculpt.

    Thanks. When you want a sculpt to use for a Heavy Tank, it helps a lot to know how the size compares to OOB units.

  • '17 '16 '15 Organizer '14 Customizer '13 '12 '11 '10

    Since these sculpts are flowing so fancy free like popcorn, can you make a 25-30 sculpt set of World War 1 miniatures?

    I can submit a list


  • I made this post to advise changing the “SEMMOVENTE 42” name (in the image) to “SEMOVENTE DA 75/18” or “SEMOVENTE M42 DA 75/18” but now I see it is listed as “Semovente M42 da75/18” (so I edited the post).

  • Sponsor 2022 '20 '19 '18 '17 '16 '12

    @Imperious-Leader said in 3D Printed Axis and Allies Board Game Pieces Available:

    Since these sculpts are flowing so fancy free like popcorn, can you make a 25-30 sculpt set of World War 1 miniatures?

    I can submit a list

    These sculpts have taken months and many are still being worked on. 🙂

    You’re welcome to submit a list, though there is no guarantee of getting them done (least of all soon).

  • '17 '16 '15 Organizer '14 Customizer '13 '12 '11 '10

    Well i can help finance this. i will pm you

  • Sponsor 2022 '20 '19 '18 '17 '16 '12

    Pulling all of the Italian pieces for quality issues. Going to do a re-design and re-test. I have a feeling the filament being used is not the best either (our lighter brown pieces came out phenomenal, but the “wrong” color).

  • '17 '16 '15 Organizer '14 Customizer '13 '12 '11 '10

    Oh and sorry for slagging your 3D printed pieces earlier. It thru me for a loop because all of a sudden you just appeared with 20 sculpts and they were all over the place in terms of type and nation. I get your direction now.


  • @IWillNeverGrowUp yeah there is something going on they are definitely not as good as the others

  • Sponsor 2022 '20 '19 '18 '17 '16 '12

    @Call77 said in 3D Printed Axis and Allies Board Game Pieces Available:

    @IWillNeverGrowUp yeah there is something going on they are definitely not as good as the others

    Yup. I’m about 80% sure it’s this particular brand and/or color of filament. I’m doing some trouble shooting to see where it’s gone wrong on those.


  • @IWillNeverGrowUp well it cant X and Y wobble if your other prints work out as clean. Keep up the great work cheers

Suggested Topics

I Will Never Grow Up Games
Axis & Allies Boardgaming Custom Painted Miniatures
Dean's Army Guys

51
Online

16.3k
Users

38.0k
Topics

1.6m
Posts