Metabarons flight deck decals

I’ve used the 1/16 x 1/32 magnets available from http://www.primalhorizon.com/products.php and I highly recommend them.

@Harvard3X1 said in Metal Flight Stands - Different height? Is there an interest?:

Deadline is getting really close & campaign goal has not been met… we need to spread the word !!! I know the game has never been the same since I purchased these stands; totally different feeling when playing & looking at the map!

We appreciate any effort to get this funded!

Of course, the campaign is only 17 days total to begin with so we’re about 1/4 of the way through. It would obviously be really nice to be higher than we’re at.

If things aren’t looking up by next weekend we may have to regroup.

fstand.jpg

The Base is the same size of an AA Gun. Fits Perfect.

I plan on printing some out from Siredblood’s link.  I watched his video and you can certainly do it that way.  My only concern with adhesive backed “stickers” is that with all the handling of game pieces, I can imagine that the stickers begin to peel up after a while. If you’re going to use the adhesive backed stickers, might I recommend to apply thin CA glue around the outside edge of the sticker after you’ve burnished it down on the carrier deck.  You can get some thin CA at your local hobby shop where they sell RC planes, or just order it online.  Because it is literally as thin as water, you’ll need to apply it with some sort of makeshift precision applicator.  But after that, you won’t have to deal with annoying stickers that don’t want to stay down tight.

Also, if you use a glossy type sticker paper, after you’ve applied it and the carrier is “all done”, spray the entire piece with a light coat of Testor’s Dullcote spray laquer.  You’ll get rid of the sheen both on the plastic and from the glossy paper. All the colors will “blend” together and the piece will look much better.  :wink:

Thanks DMcLaren. Those are really good tips as well. :-)

@wartorn:

A good do it yourself remedy since the market is super dry with them right now

And who knows when more will ever become available again.

@Young:

@bigalmeacham:

hey there…would you be so kind to make me a set of these excellent cards and obviously I pay you whatever to get them to me…
alan Meacham
rapid city, mi
p.s…maybe the “future” Michigan challenges your Toronto group

Have you tried ordering them from artscow? here’s the link…

http://www.artscow.com/gallery/playing-cards/grasshopper-n15lei8zzj4y

Just got mine, and I’m really pleased with them. :-)

Hey all, new to the Axis and Allies forums and to customizing my ships. I apologize if this was answered elsewhere, but how do I size these carrier decals down to fit my ships? They look much bigger, and I’m assuming I need to arrange them onto a photoshopped page of some sort?

As a side note, i’m curious if anyone has made country symbols on a handy one piece sheet with all the countries included so that I can print out one set and decal up my whole set of models. I’m not sure if they have them in a 6mm size, or 8mm size etc.

If not I might have to try this on my own, but I didn’t want to recreate work someone else has already done.