Board Frames

@hopper1999 I’ve access to both resin and PLA printers, and while resin has a couple of extra steps compared to PLA, I wouldn’t consider it painful. I’ve come to appreciate resin’s ability to show detail even in very small scale. For me its worth the extra steps to clean and cure, for those results. What’s great is there are so many free units available, with some simple editing/converting you can quickly build cool armies.
As for casting, while I haven’t casted any A&A parts yet (still building my unit library), I have casted a lot of 3.75 action figure parts. I’ve gotten best results using a syringe and pressure pot. (I converted a old paint pressure tank). You inject your mold, and then put it under pressure, I’d do around 30psi, to help the resin into the thinner parts of the mold and prevent bubbles. It also helps, when making your mold to put it under pressure as well. I’ve found it helps prevents bubbles in the silicone and between the silicone and the part being cast.
I plan on using casting to duplicate units I already have, that I can’t find stl files for.

¿Where is the Ecuador line on G40 board? We marked it, as best we can. If you want summer/winter dynamic house rule, this is the geography division, in this board.

152310617_2844685905795805_2241943045422334519_o.jpg

@DMcLaren thanks I agree he must be a veteran.

@hengst said in Historical Board Gaming Piece Colors:

On this note, is “blonde” or “tan” a better color match for OOB UK G40 pieces?

I think tan is a better match. Blonde is too light a color to be a good match.

-Midnight_Reaper

Bump

Im working on a display for my HBG Minis.
But I decided to make a small table.

But i picked a different way of making it. Instead of picking out where to place tanks and etc… I played a small war game on it. Hence “Living boards” as each bored is determined by the outcome of a battle.

ORBAT
Allied-3 M4 Sherman/ 1 F-86 Sabre
OPFOR-4 T-34/ No air

Rules
Tanks
Rear- Die roll of 2
Sides -4
Front-5
Top-2
To defeat a shot you have to out roll the die.
Air support is a single sweep of 3 die. Air is called in rolling 4 die and getting 12 and up.

Turns
First 3 turns were moving. Turn 3 had the first M4 fire at a T34.
At the end of turn 3, 1 Sherman had been lost.
Turn 4 saw the loss of one T34
Turn 5 saw the loss of another M4
Turn 6 saw the loss of another T34 and a filed Allied air support call in.
Turn 7 saw no losses despite the Successful role for a Sabre air support.
Turn 8 saw the lose of the Last M4.

Result.
The Bridge leading out of town (Occupied by OPFOR) is blocked with the remains of the M4s.
The ORBAT forces lost half their strength, and must await engineers to clear the bridge.
The Bridge is still intact, but may have some damages due to the exploding tanks.
Allied forces failed to establish a front line on the other side of the bridge.
Images
Is they dont show up, right click and view image. Ill work on fixing them ASAP.
Turn 1

Turn 2

Turn 3

Turn 5

Turn 6

Turn 8

Out Come
OPFOR can push towards a Allied Airbase, where hopefully the Allies can hold to keep Air Support close (12 or Higher. If lost, the die role becomes 18 or higher.)
ORBAT
4 Allied Tanks
1 Allied Air
6 Opfor Tanks
1 Opfor Air
Any comments on how im making my displays? Also hope this is a proper area to post this customization, or would it fall in minis.

It does fit, u place the two pices on top of eachother (they are only 40 mm high, the man board is 50 mm outside = 42 mm inside). The space is 600x800x84 when folded, the two pices on top of eachother are 500x600x80. That leaves a 300x600x80 space and my plan there is to make box of wood or paper to store units, dices etc!  :-D

@sgtwiltan:

It’s really too bad you didn’t make the side piece so that it would fit into the inner portion of the main board where the map is.
You could even make a simple cover to keep the pieces inside from falling out all over the place. It’s a great idea you have there though.

Yeah, it was really hard to get them the way I wanted them to look. I am glad I decided to go with painting the symbols because it’s more gratifying then slapping a sticker on the pieces……in my opinion.