AAA50th painted minis

Here’s another pic in dimmer light, which is a better comparison to the before picture above.

The silver pops nicely. Before, in the same lighting situation, I couldn’t see most of the border lines at all.

I used the Edding 5300 silver acrylic paint marker with a 1-2 mm tip
The silver seems to really catch what little light there is in the room.

As the paint the marker ran low of paint it was harder and harder to control, so I reccomend just stopping and using a fresh paint marker if this happens. A few of the last lines I did are fatter than I would like because of this.
But the overal result is a huge improvement.

IMG_20230304_154631.jpg

@cavestone I also use vallejo paints. The key question here is are you brush painting, or using an airbrush, or both?

The Vallejo paints have a “Model Air” line that comes pre-thinned. You can buy a thinning product (from them) to add to the “Model Color” series paints, which are the exact same thing, just more concentrated and thicker.

If you’ve never used an airbrush, its a bit finicky–it requires regular cleaning and a without a good brush and compressor the paint will flow very inconsistently. The process will be very frustrating unless you use the pre-thinned paints because the brush can only blow paint that is within a certain set of thickness parameters that are difficult to achieve, especially if you are trying to mix the air in the brush’s reserve or in small quantities. That’s why having copies of both Model Air and Model Color is fine by me–unlike Warhammer 40K I’m using primarily earthy colors, greens, dunkelgelb and dunkelgrau… other AFV and camoflage colors and so i don’t need a collection of primary or bright colors.

But I recommend it. The airbrush creates a sublime, beautiful layer and slight mix variations can be used to create shadows, grades, etc. Then you go back over with your brush, adding highlights, lines, details. Then, back over again with a drybrushing…then back to the airbrush to blast Flory Wash all over it.

Can’t see your photos, you can’t post photos until you have a certain post count. I wouldn’t use water to thin paints, they are water soluble but the mix and viscosity is all wrong (though water is obv. cheap and easy to clean up)

As for oil-based paints, these require thinner to clean up, they are much more difficult to drybrush with and are not used for airbrushing. The days of the old testors paints is long behind us–even apple barrel paints are easier to work with and cheaper. The early painting methods were much more about glomming thick layers of paint onto lead miniatures and the modern approach with water based paint and a series of different techniques creates much better results.

When I painted my units, I had issues with Britain, I originally made 2 schemes, then decided I only wanted the tan, not green… On my painting, I used a combo of lacquer Enamel and acrylic, it was at the enamel stage, but I soaked them in paint thinner (in all preparation to consider them toast and order new units)… but they came clean, they soaked for 10 min or so, and I used my tooth brush (yes mine lol, bristle’s turned green, and yes, I still use it, the green faded away HAHA) to scrub away the paint film.

@dangermouse650:

@John:

@dangermouse650:

Great work John

Thanks DM.

Where have you been?

Have you been working, as of late?

Yes, work has been very hectic and other life happenings that are keeping me too busy to paint……but keep up with yours your doing great. :-)

Appreciate it DM. I hope you get to paint soon. :-)

John

Very nice

Guys,

––This thread will eventually contain all of the U.K.-European Forces(London-based) that I’ve had detailed and painted by the “WARMACHINE TEAM”.

––So far the list contains:

BRITAIN

U.K. European Forces(London-based)
U.K. Infantry
––U.K. (Infantry, Rifle)…European scheme…(Starting at message #1)

–-----------------------------------------------------------------------------------------------------

Everyone,

----These fine paintjobs were completed by a very talented painter by the name of Chad Coffman, a.k.a. “Allworkandnoclay” who’s AWESOME paintwork is known to everyone here on A&A.Org. I hope you enjoy them.

“Tall Paul”

infantry-uk_europe01.jpg

**Great work! Those are awesome. **

Is there something wrong with the pictures on the first couple of pages of this thread?  I only see a placeholder, generic image icon where the pictures should be.  :?

Guys,

––Well, our intelligence officers are telling us that a group of twenty(20)
Russian Rifle Infantry (Winter scheme) have just completed training(painting) and are ready for deployment in Siberia or elsewhere in NorthEast Asia. Some might get transferred to Scandinavia, at least until HBG releases their 'Winter War" expansion set for their Global Warfare 1939 game. IMHO “Allworkandnoclay” did a gret job on these soldiers. Enjoy!

“Tall Paul”

infantry-russia_winter01.jpg