3D Printing Files

IMG_7203.JPG
Hi all, here are the latest additions to the ever-growing “Affordable Armory” :)

In addition to beginning to print in Gray and Black as well as the original White, I’ve also newly designed an Anti-Aircraft Gun (similar to OOB), a Kriegsmarine Escort Ship (Type 39 Torpedo Boat), and I’m printing the Royal Navy Hunt-Class light Destroyers (original model by AntarcticFox on thingiverse) for the Allied side as well.

While I work on a few bigger things (Light Tanks, Escort Carriers, Rail Depots, Coastal Artillery…) there are also some new miscellaneous bits as well: Oil Drums, Naval/Landmines, “Czech Hedgehog” anti-tank obstacles, and Metal Bars/Ingots. Come take a look at www.Etsy.com/shop/NathanDetr0itDesigns!

Thank you for the information @vodot . Yes the AAA infantry pieces would be hard to print.
Looking at an 3D printer like the ANYCUBIC Photon S 3D Printer, UV LCD Resin Printer with Dual Z-axis Linear Rail and Upgraded UV Module & Print Quietly and Off-line Printing, Build Size 4.53"(L) x 2.56"(W) x 6.49"(H).

https://www.amazon.com/ANYCUBIC-Photon-Upgraded-Off-line-Printing/dp/B07RY6NSL8/ref=sr_1_7?keywords=3d+sla+printer&qid=1576351692&sr=8-7

I think this one will do well with most AAA pieces.

Thanks for the information guys! I’ve been wondering this for a while.  There’s a resized version( I’d post the link here but not allowed yet) but it’s stripped of a bunch of the additions I like.  The thread title is “Cleaned-up G40 map / 96x48” (Preview)"

I plan on printing some out from Siredblood’s link.  I watched his video and you can certainly do it that way.  My only concern with adhesive backed “stickers” is that with all the handling of game pieces, I can imagine that the stickers begin to peel up after a while. If you’re going to use the adhesive backed stickers, might I recommend to apply thin CA glue around the outside edge of the sticker after you’ve burnished it down on the carrier deck.  You can get some thin CA at your local hobby shop where they sell RC planes, or just order it online.  Because it is literally as thin as water, you’ll need to apply it with some sort of makeshift precision applicator.  But after that, you won’t have to deal with annoying stickers that don’t want to stay down tight.

Also, if you use a glossy type sticker paper, after you’ve applied it and the carrier is “all done”, spray the entire piece with a light coat of Testor’s Dullcote spray laquer.  You’ll get rid of the sheen both on the plastic and from the glossy paper. All the colors will “blend” together and the piece will look much better.  :wink:

Thanks LHoffman,

Your appreciation is my inspiration… because I refuse to use a sheet of glass, my research has lead me to a material called styrene (google it) which is a type of plastic sheet that can be directly printed on. All indications point to this method being the last alternative to glass and although it cost around $240, it looks to be my best option. Even after flushing $300 so far in a crappy print, and installation complications, I’m happy with this new direction if it turns out the way I’ve been told it will. Basically it’s flexible plastic, so it should lie flat without air pockets getting trapped, and because it doesn’t get laminated, the colors should be slightly brighter. If it is sensitive to scratching than there is a clear film sheet by 3M I can look into, that’s where I’m at right now.

The file service named Mediafire, already has this. There is not need to run up costs on this site to allow downloads. Why not use that free service?

Plus we already got IL’s map thread with most of these map files. If that is not true, post all the files there that are missing.