Recommendations for 3D printers to print Axis and Allies pieces, and customizations?

89942069_234023921058065_8338820971033001984_n.jpg !
88106161_221519072308550_2482507379309019136_n.jpg tn5.png

@Playing-Kid
Not much worse than a creased matt.
Mt first try would be to warm the fold with a hair dryer/heat gun, depending how much heat the vinyl can handle. May help you move the material back into the correct position.
Luck.

Concerning design and layout with customized game boards, we made a hand-made drawing - gave it to a professional company - made a great deal - and mass produced the game boards to reduce costs.
A&A Classic 2.JPG A&A Revised 2004, 1.JPG A&A Revised 1.JPG A&A Revised 9.JPG A&A Revised 10.JPG

I was guided to this site by a YouTube subscriber, it has some interesting options for trays.

http://www.toolstation.nl/shop/Opbergen/d60/Assortimentskisten+%26+dozen/sd3147

If you go to a local printer, make sure they do everything in house… if they outsource it and problems arise, it will be a headache getting your money back from that middle man because they can’t absorb the cost the way they would if it was their own print.

Redleg,

First, you have a beautiful family. Second, Your paint jobs look great. I have to really give applause to your freehand markings. It’s true decals are cleaner and sharper but I my self have used none on anything I’ve painted and I’m developing a way to layer and paint my own markings (It’s been holding up my project severely) I simply can’t afford to buy sheets of decals that I might only use a handful of.

One tip That I’ve adopted, is to use ultra-fine Sharpie permanent markers for small lines and details where a brush won’t do or may slop (canopy frames). Lastly I’ve learned from table-top gamers of much larger scale (Warhammer, Bolt Action) models that at the scale Axis & Allies models are you can “mass paint” with fewer details on many units to create large armies, fleets and air forces that will look phenomenal from eye level to table top . Anyway us A&A painters have our work cut out for ourselves. I salute you sir.

Anyway, keep on painting, Nice work.

Thanks LHoffman,

Your appreciation is my inspiration… because I refuse to use a sheet of glass, my research has lead me to a material called styrene (google it) which is a type of plastic sheet that can be directly printed on. All indications point to this method being the last alternative to glass and although it cost around $240, it looks to be my best option. Even after flushing $300 so far in a crappy print, and installation complications, I’m happy with this new direction if it turns out the way I’ve been told it will. Basically it’s flexible plastic, so it should lie flat without air pockets getting trapped, and because it doesn’t get laminated, the colors should be slightly brighter. If it is sensitive to scratching than there is a clear film sheet by 3M I can look into, that’s where I’m at right now.

After building my AA50 table and a portable wargaming table, I think I’m tabled out (and let’s face it, I just don’t have any more room for tables in my already cramped household) but I did love making them.

After painting my entire AA50th set + a Spring 1942 set of pieces, I’d be more than willing to do more if the need arose.

Right now I’m more into Wargaming terrain and miniatures though.  There’s enough there to keep me pretty busy!