Engineering

Chemical EngineeringQ&A Library3.14. Limestone (calcium carbonate) particles are stored in 50-L bags. The void fraction of the particulate matter is 0.30 (liter of void space per liter of total volume) and the specific gravity of solid calcium carbonate is 2.93 (a) Estimate the bulk density of the bag contents (kg CaCO3liter of total volume). (b) Estimate the weight (W) of the filled bags. State what you are neglecting in your estimate. (c) The contents of three bags are fed to a ball mill, a device something like a rotating clothes dryer containing steel balls. The tumbling action of the balls crushes the limestone particles and turns them into a powder. (See pp. 21-64 of Perry's Chemical Engineers' Handbook, 8th ed.) The limestone coming out of the mill is put back into 50-L bags. Would the limestone (i) just fl three bags, (i) fall short of filling three bags, or (ii) fill more than three bags? Briefly explain your answer.Start your trial now! First week only $4.99!*arrow_forward*

Question

Tagged in

Engineering

Chemical Engineering

Find answers to questions asked by students like you.

Q: Cyclohexanol is a highly desired chemical precursor for the production of nylon (billions of kilogra...

A: Since you are requested to answer part a and b, we are sending you solution of part (a) and (b) only...

Q: This problem is (7.13) from a book "Thermodynamics and Statistical Mechanics An Integrated Approach...

A: Note that the given expression for the intensive Gibbs energy in a binary mixture of A and B is corr...

Q: H3CA is a vitally important intermediate in the metabolism of carbohydrates. The compound is widely...

A: Part (a):It is given that 21.35 mL of 0.678 M NaOH(aq) requires to fully neutralize 0.927 g of H3CAA...

Q: An aqueous solution of sodium hydroxide contains 20% NaOH by mass. It is desired to produce an 8% Na...

A: Part(a):Basis: 100 g of feed solutionIf 20% NaOH is present in the feed solution, then the mass of N...

Q: A gas heater shown below in cross-section consists of a square sheet metal duct insulated on the out...

A: Part (a)The formula to calculate the equivalent diameter of the heater is:

Q: Acetone is used in the manufacture of many chemicals and also as a solvent. In its latter role, many...

A: Apply material balance on overall process including all the 3 units (adsorber column, distillation c...

Q: I resubmitted the question again because it wasn’t Reynold number before thanks

A: Reynolds number, a dimensionless number [M0L0T0], is defined as the ratio of inertial force to visco...

Q: *"24.27 In the vapor-recompression evaporator shown in Figure P24.27, the vapor produced on evaporat...

A: Part (a) The schematic flow diagram for the given process is shown below. Let the system be consider...

Q: A plastic (k = 0.5 W/m*K) pipe carries a coolant at –35C with a heat-transfer coefficient of 300 W/m...

A: Part (a)Inner radius of the pipe is, r1 = 3/2 cm = 1.5x102 mOuter radius of the pipe is, r2 = 4/2 cm...

Q: 100 mol/min of butane is combusted with 60% excess air. What is the molar flow rate of air to the co...

A: The reaction for combustion of butane is:

Q: A consulting firm has designed a steam system for a new process unit at your plant. Super heated ste...

A: Part (a)The diagram representing the cross section of the insulated pipe containing steam is shown b...

Q: 6. The manufacture of such products as penicillin, tetracycline, vitamins, and other pharmaceuticals...

A: Part (a)The basis of the process is taken as 98 lb/hr of the feed. The symbol used for vitamins is ‘...

Q: The extraction of acetic acid from water is both industrially and environmentally significant. Methy...

A: Part (a)100 kg of the feed in stream 1 containing 75 wt% water (W) and 25% acetic acid (A). Stream 2...

Q: is carried out isothermally in a continuous flow reactor. Calculate both the CSTR and the PFR reacto...

A: The reaction taking place is, S→P According to the Michaelis-Menten equation, the reaction rate for ...

Q: 4.8 A surge tank in Fig. E4.8 is designed with a slotted weir so that the outflow rate, w, is propor...

A: Apply material balance on the given system as:

Q:

A: Dear student, we provide answers to three parts in a question. So, we are providing answers to first...

Q: This problem is (9.13) from a book "Thermodynamics and Statistical Mechanics An Integrated Approach...

A: The fugacity of the monoatomic gas is given by:

Q: The oxidative coupling of methane to form ethylene (2 CH4 + O2 -> C2H4 + 2 H2O) is known as the “...

A: c) Density is defined as mass per unut volume. Thus, density of the inlet mixture may be determined ...

Q: 1. A closed stirred-tank reactor with two compartments is shown in Fig. El. The basic idea s to feed...

A: Assumptions:Let the heat capacity of the component be represented by C and be constant.Let the densi...

Q: Diesel exhaust fuel (DEF) is a mixture of Urea (CH4N2O) and water (H2O). Often the urea in DEF is ma...

A: Let the basis of the calculation be 1 gallon of DEF (urea + water). Density of DEF is given as 9.1 l...

Q: This problem is (6.20) from a book "Thermodynamics and Statistical Mechanics An Integrated Approach...

A: Note: Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question...

Q: 5.2. A friend suggests that the intensive pair (e,T) is enough information to determine the state of...

A: For a single phase, single component system, calculate the degree of freedom (F) from the Gibb’s pha...

Q: A new engineering graduate was putin charge of a reactor. The engineer quickly learned that the proc...

A: Part (b)The Schematic diagram of the given process is drawn below. The basis of the calculation is t...

Q: A horizontal steam pipe has an outer diameter of 8.9 cm and passes through a large room whose walls ...

A: The formula used to calculate the heat loss by radiation is written below:

Q: The oxidative coupling of methane to form ethylene (2 CH4 + O2 -> C2H4 + 2 H2O) is known as the “...

A: Dear student, we answer three parts in a question. So, we are providing answers to the first three p...

Q: Hi this is what it can help please provide the explanation for solutions don’t worry about the exac...

A: (a) To detrmine whether the contents are liquid, vapour, liquid in equilibrium with its vapourThe na...

Q: The T-x-y and P-x-y diagrams for the binary benzene-toluene system is shown below. a. The bubble poi...

A: Click to see the answer

Q: This problem is (6.13) from a book "Thermodynamics and Statistical Mechanics An Integrated Approach...

A: Note: Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question...

Q: In certain composition ranges of mixtures of ethylene tetrachloride (C2Cl4), isopropyl alcohol, and ...

A: Part (a)The basis of the calculation is taken as 100 lbs of feed mixture containing 40 mass% C2Cl4, ...

Q: (a) If 300 lb of air and 24.0 lb of carbon are fed to a reactor at 600 ° and after complete combusti...

A: Part (a)Moles of Carbon fed to the reactor is written as equation (1).Moles of Air fed to the reacto...

Q: A drier can process 800 lbs per day of a material that is 90%-by-weight H2O and 10%-by-weight solids...

A: Part (a) Let the basis of the calculations be 800 lbs feed/day. Solids are represented by ‘S’ and wa...

Q: (g) Calculate the average A1 and A2 (= VA1A2 = A) and calculate 3. Design of packed tower for extrac...

A: Since we are entitled to answer up to 3 sub-parts, we’ll answer the first 3 as you have not mentione...

Q: A 4-in. schedule 80 steel pipe (ID = 3.826 in., OD = 4.5 in.) carries a heat-transfer fluid at 600 F...

A: The schematic diagram of the pipe with insulation is given below with the inner radius R1, Outer rad...

Q: 3. Consider the following enzyme-catalyzed reaction of urea Urea + Urease (Urea. Urease)-> 2 NH, + C...

A: Part (a)Michaelis-Menten equation to be used is written as equation (1).The equation used to prepare...

Q: The T-x-y and P-x-y diagrams for the binary benzene-toluene system is shown below. a. The bubble po...

A: Click to see the answer

Q: 100 lbm/h of oil at 130F is needed for a process modification. The oil will be available at 70F, so ...

A: Oil is available at 70°F flowing at the rate of 130 lbm/h. It is required to heat the oil to 130°F. ...

Q: A substrate is decomposed in the presence of an enzyme according to the Michaelis-Menten equation wi...

A: Part (a)Let the reaction taking place in the CSTR be, S→P According to the Michaelis-Menten equation...

Q: A tank holds 100 gal of a water-salt solution in which 4.0 lb of salt is dissolved. Water runs into ...

A: Let the function for amount of salt (kg) in the tank at time ‘t’ minutes be, S(t).Now, the rate of c...

Q: An open container is filled with water up to a depth of 3 meters and above water it is filled with o...

A: As per the given information, the tank is filled with oil and water as shown in Figure1.Density of O...

Q: 9.18. In a continuous-flow process, a gas is throttled to half its density. The throttling is well d...

A: Throttling process is defined as the process for which enthalpy remains constant that is no work is ...

Q: 3.30. Coal be ing used in a power plant at a rate of 8000 Ibm/min has the following composition: Com...

A: The flowrate of coal is given as 8000 lbm/min with 4.58 lbm H2O per lbm of coal. Thus, 5.58 lbm of w...

Q: EXERCISES Section 2.1 2.1. Minimum work of separation. A refinery stream is separated at 1,500 kPa i...

A: The minimum work in kJ/h required is calculated using below formula:

Q: April 2010, the worst oil spill ever recorded occurred when an explosion and fire on the Deepwater H...

A: Part (a)The formula to calculate the pressure on an object which is submerged in a fluid is:P = ρhgH...

Q: This problem is (6.30) from a book "Thermodynamics and Statistical Mechanics An Integrated Approach...

A: Hose is used for conveying water with the value of inside and outside diameter along with the given ...

Q: A rectangular fin 1.0 ft long, 1.0 ft wide, and 2in. thick loses heat to the atmosphere at70 F. The ...

A: Given thatThermal conductivity=k=24 Btu/h.ft.0FHeat transfer coefficient=h= 2 Btu/h.ft2.0fAtmospheri...

Q: Calculate the rate of heat loss by radiation from the upper surface of the electronic chip of Proble...

A: From the given data: TS = Surface temperature = 75⸰C = 348 KTsur = surrounding temperature = 25⸰C = ...

Q: 5.20. Multistage stripper. A stripper at 50 psia with three equilibrium stages strips 1,000 kmol/h o...

A: The process diagram of given process is given below

Q: Chemical and Bio-Process Control 4edSensor Systems:Consider flow sensor that reads 10,000 lb/h when...

A: Zero is the lowest value of the range in the measuring instrument and span is the difference between...

Q: .Verizon 89% 5:33 PM Done 2. A liquid system consisting of 5 % mole ethanol and the rest being water...

A: Part (a) At constant pressure, the temperature at which the liquid mixture boils is determined as sh...

Q: 500 kg/hour of a mixture containing 10wt% methane and 90wt% ethane at 27°C and 1 bar is fed to a mix...

A: The flowchart for the given process is shown below.Here, ṁ3 kg/h is the flowrate of the product stre...