Sired's Custom Cash

@Young:

Thanks CWO Marc, really appreciate your comments… do you play often? I understand there is a lot of players in Montreal, do you have a game group?

For many years I’ve had too much going on in my life, professionally and otherwise, to have had time to do much of anything other than collecting the A&A games.  And, to be honest, I have too many issues with many of the features of the various A&A games that I’ll probably never play anything other than what I’m hoping to create at some distant point in the future when I do have the time for it, which is a completely personalized version of the Global game that, for all intents and purposes, keeps the sculpts and the map board but throws out the entire rulebook and reconceptualizes the game from scratch.  And it’s not even fully correct to say “keeps the sculpts and the map board” either.  I’ll be expanding the number of nations and the number of unit types by making use of the very large pool of A&A sculpts I’ve acquired over the years, for instance the ones from the early-edition games and the ones from 1941 and 1914.  And as I’ve noted in the thread where I’ve posted pictures of my custom table, one of the first things I did to the Global 1940 map was to rework its “under-the-plexiglass” roundel allocations to better reflect the structure of the world as it existed prior to the invasion of Manchuria in 1931, as a starting point from which I can then modify the map (by placing roundels on top of the plexiglass) to represent any subsequent starting date from 1931 onward.  A related project that I worked on to create the infrastructure for this eventual new game was the Global 1940 map inventory, a copy of which I posted over here last September:

http://www.axisandallies.org/forums/index.php?topic=36590.0

But at this point I don’t have an actual plan for what this reconceptualization will look like.  Nor am I likely to do so until I have the time to work on this project solidly for months at a time…so this may have to wait until retirement (which isn’t for tomorrow by a long shot) before this idea translates into anything concrete.

Make up your own House Rule……here are some ideas

Recruitment Center (this one just happens to be a Nazi)
-The ability to build Reg. Infantry at non-factory territories
-Territories must have a value of (1)
-Only (1) Center per Territory
-Cost: 9
-Movement: N/A
-Build of (1) Reg. Infantry
-Can be Burned, or removed round before capture
-Can be Captured and be used
-Can be Bomb and unable to produce Infantry till repaired.  Cost of Repair is (3)IPC

These will be on my Shapeways Store Soon
https://www.shapeways.com/shops/war-game-miniature

IMG_20170410_205109.jpg
IMG_20170410_205127.jpg

I’ve gotten several private messages and some responses in this thread… so just as a head’s up and a community service…

Because of the private messages, I have ALREADY made a deal to unload my custom units, and they are, in-fact, already mailed off.

I know its kinda pointless now, but if you’re still that curious as to what I did have, here’s the complete list of the custom HBG units I had purchased in the last few weeks to beef up my bins… since I later made a decision to pull them and not use them, I did eventually re-order equivalent numbers of default/original OOB A&A units from HBG to beef up my numbers (like if I didn’t like the two HBG Japanese Fuso battleships, I reordered two OOB Kongo or Yamato battleships to replace them… so-on and so-on.  Anyways, here’s the (now kinda pointless) list:

(BTW: you may notice that for the most part, planes are missing from this list… I found most custom HBG aircraft to be good enough and scaled well enough to survive my “off-scale axe”.  So there are many HBG planes like P-47s and F4F/Hellcats that survived the cut and made it into my permanent bins)

HBG Battle Pieces (custom units)

US - Olive Drab:
5x Pershing Tanks
5x M5 Stuart tanks
15x M4A3 Sherman tanks
5x P-51 fighters

5x Essex CVs
5x South Dakota BBs
2x Nevada BBs
5x Baltimore CAs

UK - Tan:
10x Churchill Tanks
10x Valentine Tanks

5x Ark Royal CVs
3x King George V BBs

Russia - Brown
2x KV-2 tanks
11x T-34 tanks
4x T-26 tanks

German - Black
2x Schleswig Holstein BBs
2x Seydlitz CVs
8x Pz-III tanks

Japan - Pumpkin Orange:
10x Type 97 tanks
5x Ki-43 fighters
2x G8N Rita bombers

2x Kaga CVs
2x Ryujo CVs
5x Nagato BBs
2x Fuso BBs
5x Mogami cruisers
5x I-400 subs

MyHBGrejects.jpg

Hi, I wanted to share the table I built for my A&A 1940 2nd Edition game board. I also built the model airplanes. The two pictures are my grandfathers in WW2, one was an airplane mechanic stationed in England and the other was a tank commander in the 3rd Armored Division Spearhead. Those are their flags adjacent to their photos.

8deda8fc-f6b8-43e6-9244-515ed6b20f70-IMG_20220605_065218765_HDR.jpg

5229b8b8-8f23-4334-be86-461082dedcd2-IMG_20220619_074454796 (002).jpg

I have lots of customization ideas that I can’t see myself creating due to time, resources, or enthusiasm. However, I would like to share them with this community in the hopes that a customizer will like the idea and create it for themselves. I don’t care for any kind on monetary reimbursement if you make money from it, all I ask is that you share with us pictures of your creation.

Cribbage board design on a wooden Aircraft Carrier model used as an Axis & Allies Income Tracker

My vision is of a wooden model aircraft carrier, and on the flight deck is a cribbage board like design where cribbage pegs are used to track income during an Axis & Allies game. I would use 3 peg holes per numerical value and have each nation represented by a colored peg. Black - Germany, Red - Russia, Orange - Japan etc…

I’ve started work on some low cost customization for Europe 1940 2nd edition (and will include pacific 1940 2nd edition when I get it). I was able to get some player aids from https://www.axisandallies.org/forums/topic/21752/game-aids-a-a-1940-global-2nd-edition. I’m also going to implement a resource system into the game, that will introduce resource costs for units (such as steel to buy tanks). Also, there will be an upkeep cost for units, eg: Each tank you have mobilized will cost a certain amount of oil per turn. This is to make the game more realistic, and to discourage unit spamming. I also plan to add more units to the game. That’s all for now

Regarding prices, here are some quotes that I got from two different Southern California print shops  (I had posted this also on the thread entitled Ambilzi & Grasshopper’s 1940 Global Map)

The first print shop provided the following estimates (note the $52 set up fee):

SET UP:  $52.05 ( digital color file set up, latex printer set up)

48" x 105" vinyl $142.63  print digital color 4/0 on white smooth vinyl (15oz)

48" x 105" canvas  $300.13  print digital color 4/0 on canvas

48" x 105" versa fabric  $273.88  print digital color 4/0 on versa fabric

53" x 116" vinyl  $174.63 print digital color 4/0 on white smooth vinyl (15oz)

53" x 116" canvas $368.13  print digital color 4/0 on canvas

53" x 116" versa fabric $335.88 please note: print cannot be any larger, printing on a 54" rolld

A second set of quotes from a different Southern California printing company for printing on vinyl (the type of material used for advertising banners):

48"x105" ,  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $230.80

53"x116",    white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $258.78

56"x122.5",  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $277.42

(I might check on the AliBaba website to see what I can find for printing services in China.  Also, I’m checking on the possibility of printing on upholstery vinyl and marine vinyl).

Added Russian Fighter and more Japanese Carriers on the website.

Also on Ebay.

www.combatminiatures.org

3 pak.jpg
3 pak.jpg