HBG german set painted

@the-captain

They are classic 1/72 scale.

That is really impressive! Very nice

Part 4: Starting the ships, adding decals to the tanks, skin tones on the soldiers

Today spent some time adding paint to the sprayed ships, including painting the water jettisons on the subs black (this was very tricky and ended up looking a little sloppy). Advice for painting the jettisons: toothpicks are not small enough! If you do use toothpicks, you’ll have to dab a dot of black for each tiny jettison.

The battleships were a bit easier, and painting the decks, bridge, and smoke stacks were all done in silver. I plan on adding the final grey coat last after the deck and stacks/bridge dry. I experimented with how to add the national emblem, and will probably opt for a white background with a red dot on the bow of the ship. In the future I may do that with the rear end of the ship.

I painted the tranny smoke stacks silver and added a white background for the emblem on the destroyers. All in all, the Japanese navy is coming along nicely.

The armor is pretty much done. I added a white flag to the front side of the armor and will be adding the red dots later. For the aircraft, I’ll be adding a red band around the rear part of the plane. I was debating between sky blue and red and may alternate just for some variety.

The soldiers got some skin! And I just want to say that adding the paint alone brings out the contours of their facial features in an excellent manner on their own. I may add a touch of black to certain areas of the face but that will be a last step. The next step will be panting their uniforms, rifles, and helmets.

After all this is done, I will be spray painting the japanese bombers white, the aircraft carrier black, and then will add the details to those. The Japanese are about 55% done all in all and I’m pleased with the results so far even if they do look a bit amateurish. Stay tuned.

IMG_6405.JPG IMG_6404.JPG IMG_6403.JPG IMG_6402.JPG

i just started painting mine.  Use spray paint.  Use Krylon grey or white primer.  After it primed spray it with the color you want as the base gray, green, earth, etc.  Then add the finishing touches the cockpit, nose, tail colors, etc.  The spray paint gives you a nice even coat.  Go light and fast over the piece about 6 inches away .  if you go slow you’ll put on to much paint.  no good you lose detail.  If you really want a sharp looking piece add decals.

look at some of my pieces on combat miniatures face book site.

Jeff Cam.

@bgugs:

They look awesome. I am trying to do almost the exact same order but am trying to break it down by nation to spread the cost out over time (I am a college student so money is tight right now)

Yeah, the costs can certainly pile up, especially since HBG has stopped selling some of the sets, forcing you to buy 5 of each piece at a higher price per piece.

Nice work - Dare I ask how many hours you put into it? For interest’s sake.

@coachofmany:

@AlphaKappa:

@Buran:

I have just received my US units I have attached some photos.  I was just wondering if what the fifth air unit is?  It looks like an F6F Hellcat fighter.  But there is nothing on the website about it.

Nice!  They look pretty good.  How’s the color compared to the OOB stuff?

HBG Olive Drab color is very close to Global 40 2nd Edition IMHO.

I don’t know, Coach!  I just bought a few of your new Shermans from a friend and I was pleasantly surprised that they match my 1st Edition US pieces pretty well.   :wink:

These Sherman sculpts are ace.  You guys did a good job with these and now I’m looking forward to getting some of the other ones too.

EDIT:  Okay, upon closer inspection in daylight, I changed my mind.  They are definitely closer in tone to 2nd Edition US.

Wicked!!!

What’s your running cost for a fully painted set of say… one nation?

Is it per piece or?

Like if I take my Europe, OOB set of German pieces, and send them to him, what would you expect the price range to be?