SgtWilTan's mods and conversions of A&A pieces

  • '18 '17 '16 '15 Customizer

    @sgtwiltan:

    I was about to ask which one but you changed the pic.
    That is why i usually change out the barrels. Too hard to straighten with hot water without mis-shaping the sculpt

    Yeah, I noticed I picked the wrong one.

    I have been meaning to ask you what materials (plastic/glue) you use to modify the pieces? Not that I have time to do so right now, but I might like to try my hand at it sometime.

  • Customizer

    I use dollar store superglue rather than hobby superglue due to price and size convenience.
    I can get 3 small tubes for a dollar versus $12 for a small bottle of hobby cyano-acrylates.
    The hobby glue also has a habit of drying out before I can use all of it which is even more of a waste.
    I also use standard styrene glue for larger flat pieces. that aren’t going to get a lot of handling.
    Paint adds extra strength for those pieces and acts almost like a second type of glue.
    You’ll probably spend over $100 in supplies to include styrene sheets in different thicknesses and rods and block strips.
    The multi-sheet packs are around $12, with the rods and strips about $5 per pack.
    Tool-wise, you’ll need at least 3 X-acto razors, a pin-vise and multiple drill bits and different blades.
    Then there are saws, metal rulers, hole punches of different sizes, micro files, sprue snips and storage containers.
    The tools are where you will spend most of your money as the pin-vise alone is more than $20.
    You will also need different grit sandpaper as well as many emory boards.

    All this isn’t to dissuade you, just an FYI in what kind of commitment you will need in supplies. It is worthwhile for the long run but
    A waste for only a few pieces. Considering your investment in painting supplies, it might be worth it for you and may even provide
    many more hours enjoying our playing pieces. Beware, it’s a slippery road to obsession. I’ve found that I’m even modifying pieces
    I have already put a basecoat on as I learn new techniques and modifications which might not even be noticed on the playing board.

  • '18 '17 '16 '15 Customizer

    Wow… I really did not think it was so involved. WRONG!

    I really would like to look into doing this, but I am not prepared with time or money at the moment, so it will have to wait. The problem is that I am constantly learning new techniques and approaches for painting, so it would be difficult to do two at once.

    Anyway, thanks for the list. A pin-vise sounds like an interesting tool. Maybe even beneficial for painting, I might look into that.

  • Customizer

    Some new Prototypes at the bottom of the first page.
    The M15-42 from Europe 1940 was converted into M13-40/M14-41s since the Germans were basically the main user of the M15-42.
    You can guess what the new artillery is. If you get it right, I did my job. Enjoy

  • Customizer

    Wil,

    ––Even though I know and accept that you are the “Mod King”,….after seeing your latest creations all I can say is;

    WOW!

    ––The artillery units are amazing!  :-o I’m still surprised when I realize that these ordinary units are STILL my favorite that you’ve done. But once I look at your “Mod Magic”, I understand why. Wow! You DEFINATELY have a talent for this.

    ----I’ve been very busy organizing things for my Railroad & Military History Museum so I have a couple of questions.
    1.) Does this latest “batch” of artillery complete the 90 unit order?
    2.) Have you been able to complete the “Commonwealth Shermans”?
    ----You know, it would probably be easier to just send me a list of what you’ve been able to complete so far and what’s still “in the works”. As always, I’m more than happy to pay you whenever you like. Hopefully when “Lucas” returns from his honeymoon we’ll continue production, although possibly on a slower timetable for the painting of units.

    Go “Team WARMACHINE!”

    “Tall Paul”

  • Customizer

    Been busy with other things so this is not a picture update.
    Just wanted to clarify the last batch of prototypes.
    Italian M13/40 or M14/41, US M3A1 Half-track, More detailed US 105mm Howitzer, Russian 76 mm divisional gun M1939 (USV), Sherman Firefly of the type used mostly by the Canadians and finally the short 25 pounder modified by the anzacz for jungle fighting.

    PS 24th anniversary of Desert Storm

    Hoorah and Semper Fi

  • Customizer

    Happy 240th Birthday Marines and happy 100th to Parris  Island, the land where I come from!!!

    Hoorah and Semper Fi

    I’ve recently have more time and have been hard at work on some more mods. Stay tuned.

  • '18 '17 '16 '15 Customizer

    @sgtwiltan:

    Happy 240th Birthday Marines and happy 100th to Parris  Island, the land where I come from!!!

    Hoorah and Semper Fi

    I’ve recently have more time and have been hard at work on some more mods. Stay tuned.

    Great news Wil. Always love you work.

    And I am grateful for your own service.

  • '18 '17 '16 '15 Customizer

    Thank you for your service, and I’m looking forward to seeing your modifications. :-)

  • '14 Customizer

    Very incredible work here and thank you for your service Sir.

  • Customizer

    Stupid PhotoBucket. Can you guys see the images?

  • '18 '17 '16 '15 Customizer

    Sgtwiltan, your photobucket is not the only, not working. Everyone, who hasn’t updated it, all their pictures are not working.

    I don’t know why.

    Swedo, cyanight, dangermouse and many other pictures are not working, as well. :-(

  • '20 '19 '18 Customizer

    Photobucket went pay to post & view.

  • '18 '17 '16 '15 Customizer

    @DMcLaren:

    Photobucket went pay to post & view.

    That is too bad, because some of these guys are no longer on the forums. Those pictures are lost for good, unless they update them. :-(

  • Customizer

    I think I got the pictures working again. Just need some verification.
    Yeah some of those picture threads were very good for ideas and simple paint mods that made the pieces much more realistic and fun to play with. Shame we cant see them anymore.

  • '18 '17 '16 '15 Customizer

    @sgtwiltan:

    I think I got the pictures working again. Just need some verification.
    Yeah some of those picture threads were very good for ideas and simple paint mods that made the pieces much more realistic and fun to play with. Shame we cant see them anymore.

    It is working now.

    Are you still doing mod work for Tall Paul?

  • Customizer

    Yes. There are so many. Trying to get one thing done at a time. I sent back some pieces and have started on a big batch of artillery which he loves. I’m amazed at his patience. Still have a lot of pieces he sent me and was able to find and keep them in a box so I know which pieces are his that I need to work on. They had been lost in multiple boxes from when I moved 4 years ago. I’ve also redone literally hundreds of PZIIIs including some all of the painted ones. One of these days…… I’ll get them done.

  • '18 '17 '16 '15 Customizer

    @sgtwiltan:

    Yes. There are so many. Trying to get one thing done at a time. I sent back some pieces and have started on a big batch of artillery which he loves. I’m amazed at his patience. Still have a lot of pieces he sent me and was able to find and keep them in a box so I know which pieces are his that I need to work on. They had been lost in multiple boxes from when I moved 4 years ago. I’ve also redone literally hundreds of PZIIIs including some all of the painted ones. One of these days…… I’ll get them done.

    That is cool! I’m sure he doesn’t mind, because the end result is fantastic. :-)

Suggested Topics

  • 3
  • 6
  • 7
  • 65
  • 124
  • 7
  • 14
  • 9
Axis & Allies Boardgaming Custom Painted Miniatures

27

Online

17.0k

Users

39.3k

Topics

1.7m

Posts