HBG - Axis & Allies Parts/Accessories and Custom Piece Sets Store!

  • Customizer

    Hey DrLarsen,
    You need to get yourself a Dremel Cordless Rotary Tool. These things are fantastic for tiny, detailed work. There are all sorts of attachments for them like grinding wheels, engraving cutters, polishing accessories, sanding accessories and most important, tiny drill bits.
    For the little drill bits, you would probably have to get a set of “collets” which are these little metal shafts which hold the drill bit and the collets themselves are held in place on the tool by a collet nut. Or, you can do like I did and go to their site and get this tiny chuck. If you have ever used a regular sized drill, you know how to operate the chuck. Well, this is the same thing, just much smaller. It cost a little more, but it was worth it to me not to have to worry about getting the right size collet.
    I use this tool when I work on my models that require tiny holes to fit together. You could easily drill a small hole in your resin ships without the worry of them breaking apart. I’ve got a drill bit set for my Dremel that covers sizes from 1/8 inch (largest) to 1/32 inch (smallest). The 1/32" bit is nearly the same thickness as the wire of a standard paper clip.
    You should be able to find a Dremel at most hobby stores and tool stores.
    Good luck with your ships.


  • hmmm., yeah the Dremel sounds like just the ticket.

    On a different note: I did a test print of the Italian sheet on regular copy paper and wasn’t too happy with the printout quality.  Any advice as to what sort of paper I should print on to make it print out a little cleaner and brighter?

    I think the HBG coasters will do nicely, actually.  They’re actually a little big, but that’s OK.  This gives me two choices.  I can cut it out to fit… or I can leave the white space around the marshalling cards and have a marshalling card on the “front” and a drink coaster on the back for a nifty dual-purpose item!  I haven’t decided yet which way to go; I’ll think about it some more once I’ve solved the poor-printout problem…

  • Sponsor '17 TripleA '11 '10

    Probably photo paper would give the best look, but you CANNOT get that stuff wet. It will run with the slightest bit of moisture. Not dual purpose with coasters…


  • @Variable:

    Probably photo paper would give the best look, but you CANNOT get that stuff wet. It will run with the slightest bit of moisture. Not dual purpose with coasters…

    Even long after it’s dried?  Maybe I should try it but get them laminated?  But I’m not sure how well that would work with the flags…

  • Sponsor '17 TripleA '11 '10

    Try using labels for the flags. Semi-glossy and self adhesive to stick back on itself after wrapping it around the pin.


  • @Variable:

    Try using labels for the flags. Semi-glossy and self adhesive to stick back on itself after wrapping it around the pin.

    Is there a particular brand of labels that matches up with the PDF layout?  I’ve made extensive use of Avery labels, but the Task force pdf file doesn’t seem to match up with any I’m familiar with…


  • OK, I just have to say that those HBG coasters are absolutely perfect for the marshalling cards; no trimming necessary.  All I have to do is cut out the cards from the printout (of the one-label sheet like you mentioned) and stick it on and it looks great just like it is, even without trimming!  To get an objective view I showed them to my dad and he said they looked like something that would have come with the game, not something “homemade.”  Unfortunately, I only had 10 of those coasters, which considering that Coach sends a free one with each order, must mean that I’ve made at least ten orders!  I might order a bunch more of those coasters just to make some more marshalling cards, but I’m afraid I wouldn’t get them in time for this next week’s tournament anyway…

  • Sponsor '17 TripleA '11 '10

    We’re gonna need some pics Doc!


  • @Variable:

    We’re gonna need some pics Doc!

    If I knew how, I’d have already done it!  They look pretty good… Maybe when I get to VA I can get some help with the whole posting-a-picture-thing from some of my students who are doubtless more tech savy than I…


  • Is there any plans to do Task force markers like the Blue ones from old school pacific?


  • @Yavid:

    Is there any plans to do Task force markers like the Blue ones from old school pacific?

    That’s not a bad idea.  The task force markers that I made look great, but since I only had 5 players, I ended up using a small board, which ended up being too small for my ship markers, so I ended up pulling out a set of task force markers from “old school pacific” to use for naval task forces.  The land-based ones that I made using TT oversize pieces work great, though, even better than the old ones (which would look ridiculous on land anyhow, since they’re images of ships!)  So, the “catch-as-can” approach to creating my own went well and I’m happy with the result, overall, but that doesn’t mean that there isn’t any room for improvement…

    Incidentally, Coach, the coasters arrived right on time today (Thanks again for your speedy and efficient service!) and so I finished my task force markers.  They look great!  I’m going to get some pictures tomorrow to post…


  • Hey Coach,

    Once the (current small-board) game is over, I think I’m going to set up a game of GW1939 (Complete with all the neutral/ minors and special units as well as the task force markers I’ve just made from the downloads from your web site) just to see what it looks like and to take pictures…  Where can I find a set of set-up charts for GW1939?  I looked all over the HBG web site for them and couldn’t find them… What am I missing?


  • @DrLarsen:

    Hey Coach,

    Once the (current small-board) game is over, I think I’m going to set up a game of GW1939 (Complete with all the neutral/ minors and special units as well as the task force markers I’ve just made from the downloads from your web site) just to see what it looks like and to take pictures…  Where can I find a set of set-up charts for GW1939?  I looked all over the HBG web site for them and couldn’t find them… What am I missing?

    Version 5.0 is on boardgamegeek at http://boardgamegeek.com/boardgame/113337/global-war-1939


  • or check out the Global War subforum on these forums!

    http://www.axisandallies.org/forums/index.php?board=73.0

  • Sponsor '17 TripleA '11 '10

    Thanks for the help on that Rorschach! Beat me to it.


  • will coach be selling pieces from the new games?

  • Sponsor '17 TripleA '11 '10

    @Lunarwolf:

    will coach be selling pieces from the new games?

    You betcha!


  • i just checked out the website and your already out of 25 pounders lol

  • Customizer

    Yeah, same goes for the German artillery and British Destroyers. I figured those pieces would sell very quickly. You’re probably going to have to catch his site at just the right time to get any of those new sculpts.

    By the way, I didn’t see a listing for the 1941 game. Is Coach going to sell the pieces from that game?

  • Sponsor '17 TripleA '11 '10

    Yep, 41 pieces will be available in a few more days!

Suggested Topics

Axis & Allies Boardgaming Custom Painted Miniatures

25

Online

17.0k

Users

39.3k

Topics

1.7m

Posts