Has someone done an Infrastructure Map Overlay?

My rationale for altering territory PF values was to attempt to make them more ‘relatively’ accurate. Part of the problem is that A&A is a simplified simulation. A simplified map and simplified PF values.
My proposed changes barely alter the map (I include a new South India Territory). Where I attempted an alteration was to spread PF values into ‘Siberian Territories’ , to better reflect Canadian PF values and to do the same with ‘Indonesian’ Territories.
Kreuzfeldt, I am not or was not basing my alterations on ‘oil’ or ‘resources’ only. A&A, in all it’s various incarnations, is a simplified simulation.
As to your numbered points;

The map given is the map that must be worked with. I had no thought of population as opposed to resources. My alterations to PFs are my opinion of the relative values of the Territories affected. There is an emphasis on Canada to more accurately, imho, reflect it’s component parts. I am a Canadian so I wish to see a better relative accuracy there (here). The maps and the PF resource values may not be entirely accurate for the original territories (or even for my suggestions). Again, A&A is a very simplified simulation. Compromises have to be made. It is a fact that capital Territories, especially, in Europe (& for Japan territory) HAD the overwhelming or virtually all the concentrated industry (& resources). This explains where the Factories are placed. I see no problem, therefore, that PF values for France, West Germany or Russia are increased somewhat. You think the UK (England territory) should be worth considerably more than ‘France’ (Paris) or West Germany (the Ruhr)? Your choice, not mine.
4)My intent was to give ‘relative’ value to as many ‘spaces’ (territories) as possible. This is why I added value to some of the ‘Siberian’ territories in the USSR. This is why I spread the Indonesian values out to a few more spaces. The idea of ‘oil’ is subsumed into the game. It is not necessary to make Rumania so valuable (6 pts) as you suggest. I could be incorrect about the relative value I give to the Urals & NovoSibirsk, however, I observe that the ‘Urals’ space  reflects the ‘northern (arctic) Urals’ (hardly the space for industry). NovoSibirsk space could have a higher value. Note, Kreuzfeldt, the actual names used in the USSR & the fact many of these ‘spaces’ would have had a value greater than 0. Hence, I place a number of ‘value territories’ in the spaces that reflect ‘Siberia’ or parts thereof). So, I am trying (tried) to reflect an importance for Siberia (more, in fact, than the original map).
I did not alter the PFs (total points) of any ‘Nation’ from the original game. I simply attempt to offer a more accurate ‘relative’ PF value for certain Territories. I created a few new Territories but only where logical and where able (using the original map given).
Some players may dispute my new ‘relative’ PF Territory values. I am sure some values might be altered, however, not by much, imho.
As to A&A maps? All I will say is they have improved from the original but they still present ‘problems’.
Again, A&A is a simple simulation and ‘compromises’ are (& will) be made. The above Global 1940 Map alterations are my suggestions to making this map a little bit ‘better’.

Thanks! I mostly agree with your comment about per-dice research efficiency; the only reason I didn’t include additional penalties for triple-stacking your scientists is for the sake of simplicity. If you want to play with a -3 penalty, or (even better) a -4 penalty that rounds up to a -3 penalty if you roll three 1’s, then go right ahead!

Giving each Axis nation 3 tokens and each Allied nation 2 tokens tends to give the Axis an early edge in research (they will manage their first couple of breakthroughs earlier than the Allies will), but then the Allies will start to catch up and then overtake the Axis later in the war, because the Axis scientists (on average) will be more “crowded” and will take more stacking penalties.

You could bump Radar to 14 pts. or even to 16 pts. if you really want to, but there are limited opportunities to make full use of the potential synergy. E.g., suppose Germany is using a “Dark Skies” approach to ward off Allied fleets with its enormous Nazi bomber squadrons. Britain might want both Radar and Anti-Aircraft Cruisers to help protect its fleet. Russia, on the other hand, only needs Radar – they’re not going to build any cruisers. Similarly, Russia doesn’t have much use for Jet Fighters, since if it’s suffering from a strategic bombing campaign, it won’t be able to afford much in the way of extra fighters. There’s also the concern that “Heavy Bombers” has always been an overpowered technology in every version of Axis & Allies that had tech. I tried to err in the opposite direction by making the anti-aircraft techs roughly as powerful as the aircraft-enhancement techs!

There is an “Improved Artillery” tech in some of the OOB versions of Axis & Allies, and I’ve never seen anyone buy it, except maybe Russia, who really does have to count every dollar and might not be able to afford enough artillery to fully power its infantry stacks. It is really challenging to fully exploit the advantage of 2:1 artillery support is that it’s really hard to maintain the desired ratio. E.g. if I have a stack of 10 infantry and 5 artillery, then after one round of combat, I probably have something like 2 infantry and 5 artillery, and the extra artillery support becomes moot. It stays moot on defense, too, when those artillery try to hold the ground they just captured. But if I have a stack of 20 infantry and 5 artillery instead, then my army is hugely inefficient – even with 2:1 artillery support, I’m only generating 40 pips of punch on 25 units, so I’m going to give you multiple rounds of combat in which to score hits and wear down my army.

You get the same problem in reverse if you want to only boost the artillery’s native attack power. With a stack of, e.g., 8 infantry and 3 artillery, the tech would only give you +3 pips of punch – it’s just not very exciting. You could try attacking with a stack of all artillery, e.g., 10 artillery for $40, but that just seems weird and un-thematic.

Anyway, let me know if you try out the rules, with or without some modifications! I’d be curious to see how they work in live play. I’m defending my rules so you have the benefit of my opinions, but they’re just opinions, and ultimately the house rules are there for everyone to enjoy however they like…if you think you’ll have more fun tweaking the costs or nerfing a couple of the techs, then go with what seems fun! :-)

I played another game with India at 5, but I played against myself instead of the AI (first time doing that!).

Russia got absolutely diced in the heavy Ukraine strafe, and so West Russia was abandoned R2 and with no fighter support (Iceland gone G1, no other good routes) Germany rolled over them on turn G5.

Once the fighter route was gone I went heavy tanks in India, hoping to swing out against the Japanese and provide defence for Moscow.  I did have 8 UK tanks about to rush in to Moscow for defence (on UK6), but that would have exposed India on J6 AND Japanese tanks were closing in on Moscow as well, so it would have been a 1 or 2 turn delay at most.  Japan had the luxury of building a factory in Manchuria for north route tanks and just stacking Yunnan with art and inf (with their fleet in the adjacent SZ) and deadzone Burma, so the UK troop buildup in India couldn’t really pivot out of India as much as I thought.  Any foray out of India, and the 5 IPC factory would be gone, so the two armies stayed in the gravitational pull of one another.

I’ve never really done a KJF, but I think that might work a lot better with 5 IPC India.  I might read some KJF strategies and try it out.  So far, 5 IPC India is a failure, haha.

@Narvik:

I guess the map designers made all this mistakes on purpose, just to start an extra conflict inside the original conflict, man. Dont tell me they made the map wrong seven times in a row just by accident, I dont buy that, man.

I love how Narvik says man after every sentence.  It carries with it an air of sincerity and character.
:-D

TUV counting, making sure the allies start with a clear numbers, tuv, and income advantage to compensate for the drastic positional advantage. Axis quickly catch up in income and the ICs shift to the axis within the first 3 rounds.

More importantly the axis now have to make decisions instead of having one best move to do.

Even more importantly the allies have something to look forward to potentially within the first 3 rounds which typically saw a whole lot of nothing, which is a big reason people do not play this map.

Still favors the axis to win. I like to play the axis so I am a little biased, I just hate to see the game won before it even begun.

Yes, very nice.  :-) :-)

thanks

yeah I checked out your USSR player aid
I feel a complex pattern might make it slightly harder to read the text on the printed thing
maybe just go along the line of one compact and one pretty presentation version

so would be nice to have additionally a simpler one for “comfort zone” reasons
it would look similar to revised OOB in colours patterns and style