Simple solution for long Global 1940 games

The US & UK Lend-Lease rule will be included in the the 4th Northern Europe Axis & Allies Wiking-Con which will be held in Denmark in Early 2024.

Game Reports will soon after be posted at the Global 1940 & 1943 Expansions Game Report Thread

@The-Captain

Thanks for the advice!

Add German CA in SZ26
Change RU CA to SS in SZ21.
Change OE CA to TR is SZ20.
Russian cannot attack OE on turn 1, and not subject to mines in SZ20.
Allow TR to absorb a mine hit by loss of a load.
Add German SS to SZ18.
Germany can mobilize infantry in Munich.
Switzerland is IMPASSABLE.

Thats it right there…a lot of realism is sacrificed for ease of play.
Personally, i think global is complex enough and long enough without this add on. I must admit, it is an interesting and simple mod.

Thanks SS.  I re-read the report: minor clarification:  It looks like I’m recommending that Britain can’t be attacked at all R1, but actually meant that Italy specifically needs to wait until R2 to attack (preventing the total annihilation of all UK forces from the mediterranean on R1).  Also, I thought there was little the UK could do with these house rules to prevent a takeover if Italy was allowed to attack the UK in R1, but this was assuming Italy could set up their fleet and transports to attack England on R2 with Germany, but skilled Allied players could put naval ships in the path to block Italy from joining in on R2.  With that, I think it’s appropriate to play that Italy can attack the UK on R1… especially since the Italian player only earns 10 IPC’s at start and with no National Objectives, it could be a slow climb to more income if Britain has a chance to maintain it’s fleet and holdings in Africa.

Hi Erocco,
these numbers are based on a formula found during Classic time by Dauvio Vann and his friends, then improved and adjusted to better fit the need of Second Edition units. Here is one link in House Rule:
http://www.axisandallies.org/forums/index.php?topic=40346.msg1684954#msg1684954

Below, you get the whole formula and a short explanation:

@Baron:

@Dauvio:

It came to my attention that one of my formulas are already out there that I discovered 30 years ago.
http://www.axisandallies.org/forums/index.php?action=profile;u=185969 has also discovered the formula P^2*N=S
And just for fun you can try these formulas also. S/P^2=N. √(S/N)=P
P=POINTS
N=NUMBER OF UNITS
S=STRENGTH OF ONE KIND OF UNITS IN A TERRITORY
This formula should replace the punch formula. It is much better then the punch formula.

Now the next formula is (P100)/(C^26)=S
P=POINTS
C=COST
S=STRENGTH OF THE UNIT BASED ON COST
With this formula you can also price units according to their strength. √((P100)/(S6))=C
This formula is for points. (S*(C^2*6))/100=P

For better results for some of these formulas, have all your units cost ten times then what they are. These are some of the VANN FORMULAS I came up 30 years ago.

If you have any questions about these formulas, please ask.

I found how you can get the main part of Vann formula or Baron-Larrymarx according to a specific unit as benchmark.

I took the Fighter A3 D4 C10 and I wanted to convert into Tank A3 D3 C6 as benchmark (Baron-Larrymarx formula).

Then I saw what I did.

Power (of attacking Fighter): A3 * C6 (cost of Tank)/C10 (cost of Fg) * 1 Hit Point C6 (cost of Tank)/C10 (cost of Fg) = 1.08
You can reduce this equation because (cost of Tank)(cost of Tank)/ (cost of Fg)*(cost of Fg) is same to
(cost of Tank) IPCs^2 / (cost of Fg) IPCs^2 and give a simple ratio.

C6^2*A3/C10^2 = 1.08
36 squared IPCs 3 Power * 1 Hit /100 squared IPCs = 1.08 PowerHit Point

This explained what is hidden in Baron-Larrymarx formula:
Offence or defence strength factor= 36*Power/Cost^2.

The whole Enigma formula is
Refence unit Cost^2Power of the actual unit1 HP/Cost of the actual unit^2

So, the Basic offence or defence strength factor result (1.08, in this case) is express in Power*Hit Point
1^2*Power (of a given unit)*1 hit/Cost (of this same given unit)^2

And this formula can be adapt according to any benchmark, for instance a 1 IPC unit:
131 hit/10^2 = 0.300

And this is a very small number. That’s why Vann formula:
Strength= (Power100)/(Cost^26)

add an arbitrary 1001/6= 16.667…
So, 16.667131 hit/10^2 = 0.5
And this would provide the Fighter strength attack factor based on an hypothetical benchmark unit of √16.667 = 4.0825 IPCs.
A 5 IPCs revised Tank in Vann formula gives a Strength : 16.66731 hit/5^2 = 2.00 powerhit

Can you elaborate on the ship calculations?

Destroyer strength: .30144/8^2  = 0.675
Cruiser    strength: .60144/12^2= 0.600
Battleship strength: .701442.618/20^2 = 0.660

These numbers means that Destroyer is the most optimized unit for combat to buy for each IPC invested, then it is battleship and finally Cruiser.
Said otherwise, Cruiser is sub-optimal for the cost.
3 DDs C8 A3 D3 (A9 D9, 3 hits) will be stronger than 2 Cruisers C12 A6 D6 (A12 D12, 2 hits) if you can use a Battlecalc to test D10-sided values.

From stronger to weaker for 120 IPCs basis:
15 DDs A3 D3 (A45 D45)
6 BBs A7 D7 (A42 D42)
10 CAs A6 D6 (A60 D60)

I use sea planes for convoy raiding and as tactical bombers against a naval force with target selection on a 1.

@phd_angel

Thanks so much! Sorry for the delayed response here. I was on parental leave with my son, so I wasn’t online much the last few months!

I definitely appreciate the feedback. I’m with you, my hope for any houserule is to keep a semblance of realism while working out whatever game play issues there were that made the houserule pop up in the first place!

The uncertainty of allegiances pre-battle is quite interesting. But I try to minimize dice randomness. IRL (in real life), Vichy troops (just like Italians) surrendered as soon as seeing enemy superiority: thus, in the game, if Allies send more land + air units than defending Vichy units, there is no battle but surrender. Or, make it unlikely that a battle would ensue (for example, need to roll a 1).

I definitely agree overall here, I think this one got away from A&A mechanics the most. Part of me didn’t want to make it completely against the Axis, but I think something like you suggest on bringing more men (or maybe twice as many), would void any combat.

IPC system, however, is historically inaccurate (as in most, if not all, Vichy mods I’ve seen): IRL, Nazi Germany profited handsomely on Vichy which had to quite richly sustain 300,000 German troops stationed in Northern France! So, in the game, Germany should actually gain IPC bonus, whereas Vichy and Free France gain nothing. How much, certainly 3 IPC, at least.

I also get your point here. However, the main goal for me in creating the Vichy France rule was an overwhelming thought by players that the Axis has too great an advantage. By creating Vichy in this scenario it weakens the Axis some by taking away from them, as well as adding to the Allies by adding the Free French. I think if we were to give the Germans more IPC’s, it takes away the point of creating the rule in the first place (which again, was to try and help weaken the OOB Axis advantages).

Finally, Germany never fought Vichy. IRL, with Operation Torch, Germany simply occupied Vichy in 1942, with no resistance whatsoever. Vichy units were disbanded. That can be also the case in the game.

I also agree that combat did not really happen, at least on a large scale. I suppose I don’t know enough to understand every potential action that might have happened, no matter how small. This was again something designed to make the German player think twice before just invading the Vichy territories. It’s going to cost them a bit. Again, just a device to hopefully help balance.

I personally don’t like the idea of bids at the beginning of a game. We try and either house rule to help change, or just deal with it how we can. But yeah, the main hope/goal here was to have a somewhat realistic scenario, while also hopefully tipping the scales a bit away from the Axis, while not ruining gameplay and design too much.

Thanks so much for your input! Hope 2021 is treating you well!

Chris