Twin 88mm turrets for Maus / E-100

This is a complete diorama, and the 88 flak comes off for use all by itself. Crew are positioned so the gun (which swivels) can rotate without hitting any. The front shield comes off, for use as the “other” flak. Thier is also a high velocity crucible mount 88mm AT gun which will mount on this very same base. This high velocity 88 is part of another order, and isnt completed yet.
  Scrb brushes (3) are on the base, and made with camel hair. Resin cast ammo crates and ammunition are present. But no empty shell cases, as this crew has just set up. One crewman is pulling the camo netting down to be set up. Note that many of the crewman have had weapons and excessive packs removed, since heavy gun crews left such things on thier vehicle. One man has had his jacket trimmed down and now looks to be wearing just his white undershirt. One man has a panzershriek modified into a rangefinder.
.

.

.

Most of it I sell, but I keep a little for myself.

After using my Sd251s and Sd234s I realized I needed a couple more, cheaper units, to throw into battle as “disposbale guns” that I didnt mind losing if they never got a shot off. I also got tired of my 75mm AT guns being too weak, and my 88 flaks being too easy to hit, so I made my fav gun, the low-profile 88mm high-velocity AT gun by adding a nashorn gun to the base of a 75mm gun. I included a 75mm gun in the pic for comparison to my new 88. No worries, the Nashorn which lost its gun to make this, was put to good use - it became a Hummel.
  I was short on 75mm guns too, so 1 of these RSO’s is short a gun yet, to be made and added later.
  I made the RSOs by chopping Marders down to just the treads, and enough of the front and back hull to hold them together. Clear plastic (cut from a football card protector and sanded so glue would work on it) is the base for the superstructure, and provides the surface to mount the gun on. Balso is what the superstructure is made from, and paper is used extensively in it, especially to makes the hull sides smooth. Brass is used for the drivers seat. When I used my reference pics I noticed thier is stuff on the sides of these, not sure if it is loose legs for the guns, or some form of apparatus for folding the sdies of the vehicle down. But in either case, I just used some pieces from old model ships that gave an approximate look, and they are not 100% accurate. I just didnt like the completely flat sides I had, and had to add on something.

Here are some I made for a customer. Unlike the others I am about to post (that I made for myself), these are all permanently mounted armament, with a bit more attention to finer details. I snuck in a couple SD250s with mortars, cause they are permanently mounted weapons, but the 2 plain sand ones are for my own army.
  Also, the 2 flame throwers are for my army. Those have electical wire for the fuel hoses, and included are the fuel tanks and pumps. Those have more detail than I normally do for my own pieces - mainly cause I plan to use them in every game I play.

SD250s & Sd222’s combined to make these, plus 1 marder.

http://aaminis.myfastforum.org/forum8.php

and

http://forums.gleemax.com/forumdisplay.php?f=743