• Page 8 - “Sea zones are either friendly or hostile.  Friendly sea zones contain no surface warships belonging to a power with which you are at war.”

    So all sea zones on the map are friendly to the USA before being at war with Japan.  Warships of the Japs and Americans can peacefully coexist in the same sea zone before the time that the USA is at war.


  • Ìîæíî ëè òóò ðàçìåùàòü ññûëêè íà ñàéòû ñ ïîäáîðêàìè ñîôòà?   
    íå çàïðåùåííî ëè ýòî ïðàâèëàìè?

  • Customizer

    Hi Krieg,

    2 clarifications required:

    First) I am little bit confused about movement allowed before war is declared.  Please tell me if the below is true or not:
    **Japan and UK/ANZAC may move AIR units over land owned by each other, even when they are not at war.  The exception is that UK/ANZAC may not move air units over “originally” Chinese territories (any territory with a chinese flag).  They may not however move land units over land owned by each other.  UK/ANZAC may not move any units into China or USA, including air units.
    So for example, the UK could move fighters over Siam, but not over Kwangsi. **

    Second) Dutch territories have been clarified to death, but not French territories.
    My understanding:
    UK/ANZAC may take over dutch territories from the dutch by moving land units into them during combat move phase.
    UK/ANZAC may move into without taking over dutch territories from the dutch by moving air or land units into them during non-combat move phase.
    If UK/ANZAC moved a land unit into them during non-combat move phase, then during their next turn, during combat move, that unit would take over the territory?  Or would it have to move out, then move back in?  Please clarify.
    USA and move take over dutch territories from the dutch at any time (can only take them from the Japanese).
    USA can not move land or air units into them during noncombat move, even if they are at war with the Japanese and allied to UK/ANZAC.  USA can fly over, but not land on them.  Please clarify.

    What about French territories?
    Can UK/ANZAC conquer French territories from the French, by moving land units during combat move?
    Can UK/ANZAC noncombat move into French territories that are french, including landing aircraft there?
    If at war with Japan, can USA take over French territories from the French?  Can USA noncombat move and land air in French territories?  Can USA fly over french territories?

    Thanks,
    Veqryn

  • Official Q&A

    @Veqryn:

    Japan and UK/ANZAC may move AIR units over land owned by each other, even when they are not at war.   The exception is that UK/ANZAC may not move air units over “originally” Chinese territories (any territory with a chinese flag).  They may not however move land units over land owned by each other.

    True.

    @Veqryn:

    **UK/ANZAC may not move any units into China or USA, including air units.
    So for example, the UK could move fighters over Siam, but not over Kwangsi. **

    True.  However, the prohibition against moving units into US territories is due to US neutrality, and has nothing to do with the relations between UK/ANZAC and Japan.

    @Veqryn:

    UK/ANZAC may take over dutch territories from the dutch by moving land units into them during combat move phase.

    True.

    @Veqryn:

    UK/ANZAC may move into without taking over dutch territories from the dutch by moving air or land units into them during non-combat move phase.

    Air units, yes, but not land units.  If land units move in, the territory is claimed.  If only air units move in, it is not.

    @Veqryn:

    If UK/ANZAC moved a land unit into them during non-combat move phase, then during their next turn, during combat move, that unit would take over the territory?  Or would it have to move out, then move back in?  Please clarify.

    It would be taken over when the land unit moved in initially.

    @Veqryn:

    USA and move take over dutch territories from the dutch at any time (can only take them from the Japanese).

    Powers other than UK/ANZAC may only control Dutch territories by taking them from the Axis.

    @Veqryn:

    USA can not move land or air units into them during noncombat move, even if they are at war with the Japanese and allied to UK/ANZAC.  USA can fly over, but not land on them.  Please clarify.

    US may move into Dutch territories freely, but only if the US is at war.

    @Veqryn:

    Can UK/ANZAC conquer French territories from the French, by moving land units during combat move?

    No.

    @Veqryn:

    Can UK/ANZAC noncombat move into French territories that are french, including landing aircraft there?

    Yes, but it may not take control of them.

    @Veqryn:

    If at war with Japan, can USA take over French territories from the French?

    No, only from the Axis.

    @Veqryn:

    Can USA noncombat move and land air in French territories?  Can USA fly over french territories?

    Yes, but only if US is at war.

  • Customizer

    Ok, so ANZAC/UK can noncombat move takeover dutch territories?

    Also, let if i do take over a dutch territory, can I land my aircraft there Same turn?  or do i have to wait a turn to do so?

    And USA, once at war, can move into, and land air, in Dutch owned Dutch territories, but may not take them over from the Dutch (they stay under Dutch control).

    And it seems ANZAC/UK/USA can not take over French territories FROM France, (but of course may take them from Japan).

  • Official Q&A

    @Veqryn:

    Ok, so ANZAC/UK can noncombat move takeover dutch territories?

    Yes, with land units only.

    @Veqryn:

    Also, let if i do take over a dutch territory, can I land my aircraft there Same turn?  or do i have to wait a turn to do so?

    They may land in the same turn, as the territory was friendly (Dutch) at the beginning of the turn.

    @Veqryn:

    And USA, once at war, can move into, and land air, in Dutch owned Dutch territories, but may not take them over from the Dutch (they stay under Dutch control).

    And it seems ANZAC/UK/USA can not take over French territories FROM France, (but of course may take them from Japan).

    Correct.

  • Customizer

    thx for your answers krieg,

    I’m just going to post all the little things and clarifications i collected so far from this faq thread, in the hopes of answering people’s questions without having to read through all 13+ pages.

    Pacific 1940:
    ANZAC and UK can take over Dutch territories from the Dutch, but USA can not.  The USA can only capture them from Japan.  USA may move into Dutch territories, including landing air, ONCE it is at war with Japan, however the USA may never take them over. 
    ANZAC/UK/USA may never take French territories FROM France.  They can however, move units into French owned French territories, and land air there. 
    ANZAC and UK can noncombat move into Dutch territories without taking them over, including with Air units.  If ANZAC or UK noncombat moves land units into Dutch territories, they take them over.  If air units, they may land there without dying, but ANZAC/UK does not take the territory over.  If taken over by ANZAC/UK, you may land air there same turn. 
    Japan and UK/ANZAC may move air units over land owned by each other, even when they are not at war.  The exception is that UK/ANZAC may not move air units over “originally” Chinese territories.  They may not however move land units over land owned by each other.  UK/ANZAC may not move any units into China or USA, including air units. 
    After being at war, transports that began that turn in a now hostile sea zone may be loaded.  Unlike transports beginning in hostile sea zones where you have been at war for sometime, which may not be loaded.
    In order to not be fired on by a surprise strike, transports must make their entire move accompanied by at least one surface warship. 
    Scrambling is considered a defensive action, and it is activated by an attack, not by movement or presence alone.  Only occurs if your sea units are attacked or there is an amphibious assault. 
    Only industrial complexes are destroyed by China, aa guns and naval and air bases are not destroyed. 
    Kamikaze attacks will prevent bombardment.  So will Scrambling attacks.
    Kamikazes can only target surface warships, not airplanes, not transports, not subs.
    Captured naval and air bases can not be used until next round.  In other words, you can’t somehow use the naval base for bonus movement during noncombat. 
    Scrambled fighters must land on the island they started on, unless the island is captured (then they get 1 movement to land somewhere else).
    ANZAC’s national objective for “occupying” and originally Japanese island applies only to have the presence of units on that island, not to actually owning it or capturing it.  So if USA captures the island from Japan, ANZAC can reinforce USA there and get its objective. 
    If you are upgrading a minor complex to a major one, you can only mobilize 3 units in that territory this turn.

    How Pacific 1940 scrambling works:
    Scrambling must be completed before any combat, including kamikaze strikes, occurs.
    Scrambling may only occur from islands with air units and operating air bases (an island is a land territory with only 1 connection, which is to a sea territory).  The scrambled air may join other friendly units in the sea zone, or be the only units there.  Scrambled units are considered to be defending, and take part in combat as usual.  They can not participate in any other battles during that turn (they are not moved back to their home territory til after all battles are done).  Scrambling removes any bombardment.
    Scrambling occurs when either the island where the air units are comes under amphibious assault, and/or the sea zone surrounding that island contains friendly sea units which come under attack.

    How Pacific 1940 Kamikaze strikes work:
    After conditions have been met (that Japan has lost Okinawa or Iwo Jima), Japan is allowed to make 6 kamikaze strikes in sea zones containing the Kamikaze symbol. 
    If the Allied players move ships into one of these sea zones during Combat Move phase, then after before any battles are resolved, Japan announces if they are going to do any kamikaze strikes. 
    Japan then declares how many strikes and in what sea zones.  Each strike must target a specific surface warship, and more than one strike may target a ship.  Kamikaze strikes hit on a 2 out of 6, and any casualties are immediately removed with no chance to fire back.  These strikes prevent bombardment from happening.

    How Pacific 1940 Strategic Bombing Raids with Escorts and Interceptors work:
    Escorting fighters can originate from any territory, and join the bombers at the target.  Both the bombers and the escorting fighters may not participate in any other battles this turn, and this applies whether or not the defender commits any interceptors.  Any number of defending fighters based in the territory being targeted may be committed to intercept the attackers. 
    If interceptors are committed, an air battle takes place with these rules (all before aa guns fire):

    1. The attacking bombers and fighter escorts and the defending fighter interceptors will be the only units paricipating in the air battle.
    2. The attacking strategic bombers will not fire, but can be taken casualty.
    3. The fighters have an escort (attack) value of 1, and an interceptor (defense) value of 2.
    4. The battle lasts for only 1 round.
      After the battle is over, the fighters are considered to retreat and do not participate in the raid or get attacked by aa guns.  The surviving bombers are then split up and assigned to their targets (industrial complexes and/or air/naval bases).  The AA guns then fire against each group of bombers (not the fighter escorts).

    How Pacific 1940 submarine attack on un-escorted transports works:
    In both the combat and noncombat movement phases, a transport must make its entire move accompanied by a surface warship (no handoffs allowed), otherwise if a unescorted transport moves into or through a sea zone containing an enemy submarine, each submarine may fire on a 2 out of 6 each group of transports moving into or through that sea zone.

  • TripleA '12

    Hey guys,

    I was wondering: I see that many of the territories along the coast of mainland China have orange tinted borders (which would indicate Japanese ownership) but still have Chinese control markers on them? Forgive me, I don’t own the game but am I right in assuming that the AAP40 set dictates that Japan currently controls these territories at the start of the game? And if this is the case, do players normally place a Japanese control marker over the Chinese ones printed on the board?

    The reason I wish to know is because I am currently making a copy of map (for no particular reason) and I’m doing it in block-colour as opposed to the standard ‘terrain’ style imagery of the recent A&A Games. I got to this point in the map and I thought ‘Hmm, should I colour these territories orange or green?’

    Anyway, thank you for helping to clear this up.  :-)


  • Color them green.
    The orange border is only to show that Japan starts the game controlling those territories.  They are Chinese territories, conquered by the Japanese.  Yes they have Jap control markers on them at the beginning of the game - because they are considered Chinese territories.


  • I’m a tad confused about the Kwangtung/Burma exception for the Chinese. I understand that they are able to attack and occupy these territories, never allowed to build infantry/artillery in them, and only receive an IPC income boost for as long as Calcutta is under Axis control. My question is this: is there anything prohibiting Chinese units from moving into these two territories during noncombat movement to reinforce them? Stated another way, can I move Chinese units into them regardless of whether they are under China’s temporary control or under their original British ownership? Thank you!


  • @oklahomasailor52:

    I’m a tad confused about the Kwangtung/Burma exception for the Chinese. I understand that they are able to attack and occupy these territories, never allowed to build infantry/artillery in them, and only receive an IPC income boost for as long as Calcutta is under Axis control. My question is this: is there anything prohibiting Chinese units from moving into these two territories during noncombat movement to reinforce them? Stated another way, can I move Chinese units into them regardless of whether they are under China’s temporary control or under their original British ownership? Thank you!Â

    YES  :-)
    You can always noncom Chinese units into them when they are friendly, regardless of who controls it(them).


  • how do people deal with russia in Pacific only with A3.9? I would like to see the 18 inf on the board and force Japan to garrison both Korea and Manchuria for 2 turns, then remove Russians and release Japanese forces. Perhaps Air units could fight and return in non combat.

  • TripleA '12

    Calvinhobbesliker is correct.  China can control these territories if it captures them while India is under Axis control, but they are not “Chinese territories”.

    Krieghund, can this ambiguity please be clarified and put into the official Pacific 1940 FAQ/Errata? And if still possible, into the rulebook for the upcoming Pacific 1940 reprint? I think the paragraph should read:

    “Kwangtung and Burma are special cases. While they are not Chinese territories and cannot be controlled by China, Chinese forces can attack Axis units there and occupy them, but the IPCs generated go to the United Kingdom. However, if India is under Axis control then the IPCs generated go to China. These are the only non-Chinese territories that Chinese units can occupy.”

    Is that okay? Thank you.


  • Could the line be:“Attack Axis units or move in during non combat”? Please. Not “occupy”, as that confused me. Thought Chinese could only enter to attack and evict the Japanese.

  • TripleA '12

    Agreed, wittman.

    Kreighund - again, may we please ask you to take another look at the Burma/Kwangtung situation? This came up in the Global1940 FAQ thread, and was answered by kcdzim:

    Quote from: Veqryn on May 23, 2012, 04:51:36 am

    So, just to be clear about this:

    1. China can combat move into UK owned Burma/Kwangtung before UK is at war with Japan.

    No.  Although it’s common in house rules to allow noncom movements during the combat phase, that’s not strictly legal.  If Burma/Kwangtung isn’t controlled by an enemy (and UK/ANZAC would be at war with Japan if it was), it’s not an attack, and therefore not a combat move.  You cannot move into in a friendly territory during the combat phase unless you’re passing through to attack something beyond (with a mech, tank, etc).  A combat move requires combat (or the possibility of combat).  China moving into Burma/Kwangtung while it is still UK owned will never result in combat, and technically is not to be done during the combat move phase, though that’s often overlooked.

    Quote from: Veqryn on May 23, 2012, 04:51:36 am

    2. China can noncombat move into UK owned Burma/Kwangtung before UK is at war with Japan.

    Correct.

    Quote from: Veqryn on May 23, 2012, 04:51:36 am

    3. UK may not move into any Chinese owned territory before UK is at war with Japan.

    Correct.  In order for the UK/ANZAC to noncombat move into a chinese territory OR overfly a chinese territory with a plane, they must first declare war on japan.

    As you can see, there seems to be a little confusion over what Chinese units can do in these two territories. If I am correct in my thinking, Chinese units may Noncombat Move into Kwangtung and Burma before the UK/ANZAC are at war with Japan. Is this right? The rulebook does not specifically state that. Perhaps this could also be clarified in the official Pacific 1940 FAQ/Errata, and if still possible, make it into the rulebook for the upcoming Pacific 1940 reprint.

    Many many thanks for your help.

  • Official Q&A

    Kcdzim’s answers are all correct.  This is stated in the Rulebook, although not as clearly as I would like:

    Kwangtung and Burma are special cases. While they are not Chinese territories and cannot be controlled by China, Chinese forces can attack Axis units there and occupy them, but the IPCs generated go to the United Kingdom (unless India is under Axis control). These are the only non-Chinese territories that Chinese units can occupy.

    This rule does clearly state that Chinese units can occupy these territories (see the red text).  In game terms, to “occupy” a space simply means to be in it (the simplest definition of the word).  The confusion comes in when people try to read more into the word “occupy” than is there.  This may in part be due to the fact that the wording is a little unfortunate, as it seems to connect occupation with attack in the first reference.

    The part that is unclear is exactly when China may control these territories and collect IPCs from them.  However, the normal rules for captured friendly capitals apply here (see the blue text).  This also is not as clear as it could be, and will be fixed in the next printing.  Since there is a new printing coming, the current FAQ will most likely not be changed.

  • TripleA '12

    This also is not as clear as it could be, and will be fixed in the next printing.

    That is excellent news, thank you.

    Since there is a new printing coming, the current FAQ will most likely not be changed.

    That’s a shame, but okay fair enough.

    Thanks very much for looking into and responding to the matter Krieg.

  • TripleA '12

    I am having a problem understanding a little part of the ‘Special Comments and Clarifications Related to Neutral Powers’ section on page 3 of the FAQ document, where is says:

    “Important exception – During the combat movement phase following the announced declaration of war, transports already in sea zones that have just become hostile may be loaded in those sea zones (but not in other hostile sea zones). This may occur only during the first Combat Move phase following the announced declaration of war. Once that initial combat movement phase is over, normal transport loading restrictions apply.”

    Can anyone please explain the “(but not in other hostile sea zones)” sentence? What other hostile sea zones are being referred to here? For the life of me I cannot fathom what this means.

    Thank you one and all.


  • Does it not mean you cannot move from one hostile sea zone to another and pick up  in the 2nd one? Can only load in the sea zone the transport starts in.

  • Official Q&A

    That’s what it means.

Suggested Topics

Axis & Allies Boardgaming Custom Painted Miniatures

35

Online

17.0k

Users

39.3k

Topics

1.7m

Posts